1.Select the right defoamer: According to the requirements of the desalination system, choose the appropriate desalination defoamer. Make sure you select a product that meets your requirements and prepare the required defoamer according to the product instructions.
2.Determine the amount of defoamer: Determine the appropriate amount of defoamer based on the size and degree of foam of the desalination system. You can refer to the product manual or consult the ** provider for the correct dosage advice.
3.Add defoamer: The prepared desalination defoamer is gradually added to the desalination system. It is best to add the defoamer slowly to the appropriate location, usually in the inlet pipe or in an area where foam tends to form. At the same time, ensure that the defoamer is evenly dispersed in seawater.
4.Mixing and stirring: After the defoamer is added, the defoamer is helped to fully contact and function with the foam by mixing and stirring the seawater. This can be achieved by adjusting the mixing equipment or increasing the mixing time.
5.Observe the effect: Observe the foam in the desalination system and adjust the amount of defoamer as needed. If the foam persists, you can gradually increase the amount of defoamer and observe the effect again. It is important to avoid excessive use of defoamers to avoid other adverse effects.
Please note that different desalination systems and defoamers may have different usage methods and operational details. Before using seawater desalination defoamer, please read the product manual carefully and follow the product instructions and the recommendations of the manufacturer.