Common causes and solutions for air conditioners tripping as soon as they are turned on

Mondo Home Updated on 2024-01-19

There are several reasons why an air conditioner trips as soon as it is turned on:

The live wire, neutral wire and ground wire of the air conditioner socket are connected incorrectly, and you need to check whether the power supply is wrong.

If the air switch capacity of the total unpacking is too small, for example, if the cabinet air conditioner uses C25 and C32 normally, you need to check whether the air switch capacity of the total unpacking is too small.

If the space control is damaged, the original control switch configured by the developer may have been damaged and needs to be replaced with a new one.

There is a problem with the air conditioning circuit, and the cabinet air conditioner is basically a separate circuit, while the hanging air conditioner is not necessarily a separate circuit, and the circuit needs to be checked.

If there is a problem with the special socket or switch configured by the air conditioner manufacturer, you need to check whether there is a problem with the special socket or switch.

There is a problem with the air conditioner leakage protector, and you need to check whether the air conditioner leakage protector is working properly.

If there is leakage in the line behind the air conditioner switch or the current flowing at the switch is greater than the maximum value of the current limit of the switch, it is necessary to check whether the line behind the air conditioner switch is leaking and whether the current flowing at the switch is greater than the maximum value of the current limit of the switch.

The condensation of the air conditioner during operation causes the air conditioner to leak electricity, and it is necessary to check whether there is any leakage in the line.

The temperature of the air conditioner component is too high, and the air conditioner is overheated and tripped, so it is necessary to avoid the air conditioner from overloading.

It should be noted that for the owners who do not understand the circuit, do not use tools to move the socket and the main distribution box by themselves, because there are great potential safety hazards, it is recommended to let the electrician or property arranging a professional electrician who is responsible for the decoration of the new house at that time to investigate and solve it in turn according to the above solutions.

Autumn and Winter Check-in Challenge

Related Pages