The relationship between printers and consumables is like the relationship between people and food. People can't work without food. The same goes for printers.
Consumables can be considered the food of the printer. If the consumables are selected accurately, the printer can run smoothly. If the consumables are not selected properly, there will be problems every once in a while, and it is difficult to affect the work.
So, how to choose printer consumables?Before buying consumables, it's important to understand. What printer consumables do you buy?
There are three types of printers: inkjet printers, laser printers, and dot matrix printers.
Inkjet printers are divided into: cartridge type and cartridge type. But they all have one thing in common. All used ink.
Cartridge inkjet printers can only replace ink cartridges, and the cost of use is low. Each cartridge costs hundreds of dollars and can only print a few dozen pages. Card inkjet printers are products launched by manufacturers in order to seize the market.
The machine is sold to customers at a low price, and then the user is forced to buy ** consumables instead of using the original consumables, and the manufacturer indirectly refuses to insure it, resulting in most users suffering from it.
Ink can printers are products that manufacturers are forced to launch. Users can add inks indirectly and use them at a higher cost. It can also be understood as the original continuous supply. In the past, it has been reported that users have installed uninterrupted power supply in order to reduce costs, which eventually led to the refusal of manufacturers to take out insurance, causing constant confrontation.
Laser printer consumables: toner cartridge or toner cartridge, which is divided into: toner integrated type and toner separation type. Machines with drum and powder separation typically have a short cartridge life and are suitable for adding powder. However, since the toner cartridge and powder cartridge are separate, the problem can be difficult to misdiagnose.
Sometimes it's the toner cartridge that's faulty, and people think it's the toner cartridge that's wrong. If there is a problem with the toner cartridge, they will think it is a problem with the toner cartridge. It's hard to mislead users. If you don't have a certain ability to judge, it is recommended to buy a machine that combines toner and toner.
The consumables used in dot matrix printers are: ribbon, you can change the ribbon holder or ribbon.
When buying laser printer toner cartridges, be sure to choose a brand that has a powder port. Although some brands are expensive, they do not have a powder mouth, and it is very inconvenient to add powder.
Although adding powder can reduce costs and minimize the use of toner cartridges, it is good for your health, especially for toner cartridges that are easy to powder. It's inconvenient to disassemble, and if you're not skilled, it's hard to get it everywhere.
It is recommended to buy a domestic toner cartridge, which has a powder filling port, which is very convenient when adding powder. You have to wear a mask. Not wearing a mask is chronic suicide. In fact, the toner itself is harmless, but after being inhaled into the body, it cannot be excreted from the body, causing harm. The toner particles are usually around 4 microns and put on PM25. The mask should be able to block it.
When choosing a cartridge for a cartridge inkjet printer, the first thing to consider is whether your machine has an integrated inkjet or split printhead. It doesn't matter if you have an integrated nozzle or not. Any cartridge will do. Once you use it, throw it away.
Pay attention to the separation nozzles. After all, the cartridge and the printhead are separated. Once the quality of the cartridge is good, it is difficult to cause a clog.
For cartridge-based inkjet printers, it's best to use original ink whenever possible when purchasing consumables. After all, the original ink is not difficult to clog. Even if this is not possible, you should choose alternative inks from some major manufacturers. Don't use them.
As for dot matrix printers, it doesn't matter. Ribbons are actually like that. However, if you don't have terrible manual skills, it's better to change the ribbon holder indirectly. If the ribbon installation is not skillful, the gear on the ribbon frame will not rotate stably, and it will be difficult to cause needle damage.