The mobile phone holder is a commonly used gadget in daily life, which can help us fix the mobile phone, facilitate ***shooting**, etc. This article will introduce several simple ways to make a mobile phone holder by hand, so that you can easily make a practical mobile phone holder.
1. Cardboard mobile phone holder.
Materials: 1Thick cardboard.
2.Scissors.
3.Ruler.
4.Adhesive tape.
Steps:1Use a ruler and scissors to cut the cardboard into a rectangle, the length is larger than the width of the phone, and the width is determined according to personal preference.
2.Cut a small opening at the bottom and top of the rectangle, the width of which is appropriate for the thickness of the phone.
3.Fold the cardboard into a V-shape so that the two small openings are aligned.
4.Use tape to secure the small openings at the bottom and top to ensure that the phone can be securely placed on the stand.
5.When you're done, place your phone on the stand to test the stability, and if needed, add some tape or weights to the bottom of the stand to increase stability.
Second, the plastic bottle mobile phone holder.
Materials: 1Empty plastic bottles.
2.Scissors.
3.Ruler.
4.Adhesive tape.
Steps:1Use scissors to cut the plastic bottle into two sections, the upper and lower sections are sized to fit the size of the phone.
2.Cut a small opening on each side of the upper and lower sections, and the width is suitable for the thickness of the phone.
3.Combine the upper and lower sections together so that the small mouth is aligned.
4.Use tape to secure the small openings of the upper and lower sections to ensure that the phone can be securely placed on the stand.
5.If you need to adjust the angle of your phone, you can insert some thin boards or paper jams between the upper and lower sections, adjust the angle and fix it.
6.When you're done, place your phone on the stand to test the stability, fine-tuning as needed.
3. Clip mobile phone holder.
Materials: 1Wooden clips (adjustable width clips are better).
2.Adhesive tape.
Steps:1Open the clip and adjust the width to fit the size of your phone.
2.Use tape to hold both sides of the clip together to make sure your phone can be securely placed on the clip.
3.If you need to adjust the angle of your phone, you can adjust the angle of the clip and fix it with tape.
4.When you're done, clip your phone to the stand to test the stability, fine-tuning as needed.
Fourth, wood mobile phone holder.
Materials: 1Wooden blocks (length, width, and thickness are determined according to personal preference).
2.Saw.
3.Hand drill.
4.Sanding paper.
Steps:1Use a saw to cut the wooden blocks into rectangles or other shapes to the designed size.
2.Use a flashlight drill to drill a hole in the wood block that fits on the bottom of your phone.
3.Use sanding paper to sand the edges and surface of the wood block to make it smooth.
4.Insert your phone into the hole in the wooden block to make sure it can be placed securely on the stand.
5.If needed, you can add some rubber pads or rubber pads to the bottom of the wooden block to increase the stability and slip resistance of the bracket.
6.When you're done, place your phone on the stand to test the stability, fine-tuning as needed.
Summary: With the above four simple phone holder production methods, you can choose the materials and designs that suit you to make a practical and personalized phone holder. These handmade phone holders are not only simple and easy to make, but can be adjusted and fine-tuned as needed to meet your ** and shooting needs. Whether you're at home, in the office, or on the go, these homemade phone holders are here to help. Let's try it out!
If you have any questions, you can leave a message or private message me, welcome to follow me [click to follow], together**.
Search Topic Full Time Challenge December