1. Dispensing path setting.
1.Select in the dispenser interface"Edit the path"option, draw the part of the glue pointing;
2.Adjust the shape and length of the path according to actual needs to ensure that the dispensing is spread over the entire area
3.Once you've decided on the path, save the file and upload it to the dispenser.
2. Parameter adjustment.
1.Set the appropriate dispensing pressure and speed according to different glue and dispensing head types
2.Adjust the glue flow to ensure that the glue does not flow out too much or too little during the dispensing process
3.Adjust the glue temperature and humidity to ensure that the glue can flow at the right temperature;
4.Adjust the air pressure parameters to ensure that the dispensing head is working properly.
3. Dispensing mode selection.
1.Single Point Mode: Precise control for a single dispensing position
2.Continuous mode: suitable for situations that require continuous dispensing, with high speed;
3.Linear mode: suitable for situations where dispensing lines are required, the dispensing path can be set according to the trajectory.
4. Heating settingThe dispensing machine may be affected by the ambient temperature during the dispensing process, so it is necessary to carry out appropriate heating settings to ensure the quality of dispensing.
5. Inspection and testAfter setting all the parameters, some inspection and testing are required to ensure that the dispenser can work normally. The above are the detailed steps of dispenser programming. For beginners, dispenser programming requires a certain amount of skill and experience, and it takes constant trial and error to achieve the best dispensing results.