The reason why you can't take pictures when the camera is working
1.Click"Take a photo", Da Gao took a picture and didn't respond, and the page was stuck.
Cause analysis: electrostatic interference.
Solution: Open My Computer and double-click"USB devices", there is a black, in the case of this black interface is open, unplug the data cable behind the big high shot and plug it back. Turn it on again"USB devices"You can see the image and it will work normally.
2.When taking pictures with a high-speed camera, the ** shot is not clear;Tips"The port failed to be opened"
Cause analysis: The device is not recognized, it may be loose, not plugged in, or the USB interface is wrong.
Solution: Plug and unplug the device again, replace the USB port, and re-identify it.
3.After installing the big high shot, the big high shot can't take pictures, prompt"The operation failed"
Cause Analysis: The driver is not uninstalled completely and the security level settings of the browser are corrupted by the hardware device.
Workaround:1Plug the device back in and out first.
2.Replace the USB port and re-identify it.
3.If you still can't take a photo, please check whether the small high-speed camera driver is completely uninstalled, and reinstall the big high-speed camera driver after uninstalling it completely.
4.Swap with other benches' normal high-speed cameras to test whether the hardware equipment is damaged.
4.When the high-speed camera takes a picture, the ** shot is not clear, and the photo is the document information of the previous customer.
Cause analysis: caused by chip program damage.
Solution: First of all, clean up the browser's historical browsing history, and then open the firing software according to the firing instructions and follow the steps to burn.
5.Click on the page"Scan to take a picture"button, appears"No high-speed camera equipment available!".
Cause analysis: The DLL file is not installed, or the hardware of the data cable of the high-speed camera is damaged.
Solution: If this error occurs on the premise of ensuring that the DLL has been installed, you need to check the quality of the device.
6.Click on the page"Scan to take a picture"button, if it appears"Unable to start the device!The device is already in use!".
Cause analysis: This prompt indicates that a program or port in the system occupies the ** device.
Solution: Please change to another table to try it, if not, contact the hardware manufacturer for a replacement.
What are the characteristics of high-speed cameras?
Features: 1. Green and environmental protection, a variety of appearances, small size, conducive to carrying, very suitable for mobile office platforms, the size is only 1 10 of the general scanner.
Second, it can scan the documents within A3 to the computer in one second, which greatly improves work efficiency and reduces business hours.
3. It can be displayed as a commodity, and ** record DV video with audio.
Fourth, the photographed documents can be copied 1:1 immediately, replacing the printer.
Fifth, it can carry out OCR identification of the ** taken, convert the ** to Word editable**, and automate the typesetting.
Sixth, the integration of paperless fax technology, even if there is no printer, you can still send fax, significantly improve the efficiency of faxing.
Seven can send journals, magazines, periodicals, contracts and other documents immediately e-mail, saving costs.
8. Easy to use, the foldable high-speed camera can undoubtedly be carried.