With the continuous popularization and application of LED mobile splicing screens in commercial displays, stage performances, city squares, indoor exhibitions, stadiums and other fields, its safety has also become one of the focuses of our attention. Otherwise, there will be related safety problems due to improper use, which will undoubtedly cause great inconvenience to our use. So do you know what safety issues should be paid attention to when using LED mobile splicing screen?The following is an introduction to Weishay:
The following safety issues should be paid attention to when using LED mobile splicing screens:
First, the power supply problem.
1. Pay attention to the stability of the LED mobile splicing screen power supply.
Due to the large power consumption of the LED mobile splicing screen in use, the power supply needs to have greater stability to avoid short-term voltage fluctuations, voltage jumps and other problems. If the power quality is not good, these problems often occur, which are easy to cause damage and failure to the LED mobile splicing screen, affect the normal operation of the entire display system, and even pose a threat to the personal safety of the staff. Therefore, when buying a power supply, you must choose a power supply product with good stability to ensure the normal use and personal safety of the LED mobile splicing screen.
Second, the issue of protection.
1. Keep the LED mobile splicing screen clean.
The LED mobile splicing screen will be affected by different weather and environment when working, such as: wind and sand, rain, etc., which is easy to cause dust and dirt on the LED mobile splicing screen, which seriously affects the use effect. Therefore, we need to regularly clean and maintain the LED mobile splicing screen to ensure its surface smoothness and clarity.
2. Install the protective screen.
LED mobile splicing screen installed outdoors will be subject to a variety of weather factors wear and erosion. In the rainstorm weather, the LED mobile splicing screen is damaged, so when installing the LED mobile splicing screen, a protective screen should be installed to avoid being affected by the bad weather and posing a threat to the safety of the LED mobile splicing screen.
Third, the problem of heat.
1. Maintain a good ventilation environment.
A good ventilation environment is very important for the LED mobile splicing screen, and poor ventilation will cause heat to accumulate inside the LED mobile splicing screen, resulting in damage or fuse. Therefore, the layout of the LED mobile splicing screen must consider ventilation. If the LED mobile splicing screen is placed in a closed environment, it should be equipped with appropriate heat dissipation devices, such as fans, etc. In this way, the normal operation of the LED mobile splicing screen can be ensured, and the safety problems caused by excessive temperature can be avoided.
2. Maintain a good working temperature range.
The LED mobile splicing screen must maintain an appropriate working temperature range when working, and avoid too low or too high temperature. Because the LED mobile splicing screen may be refreshed out of sync at too low temperature, and at too high temperature, the brightness will be reduced or the chip will be damaged, which is very unfavorable to the use effect. Therefore, in order to avoid these problems, we need to use LED mobile splicing screen within a reasonable operating temperature range, and it is not recommended to use it in an environment that is too hot or too cold.
To sum up, we can see that the use of LED mobile splicing screen should pay attention to the safety of power, protection, heat and other three aspects, we pay attention to these safety issues and corresponding preventive measures, not only can improve the safety awareness of users when using LED mobile splicing screen, to avoid accidents and accidents. At the same time, it can also improve the overall use effect and reliability, and escort the long-term stable operation of the LED mobile splicing screen.