Washing machine floor drain backwater is more common in home life, this situation often happens, and it is still quite a headache to deal with.
And the reason for the backfall of the washing machine floor drain is nothing more than these two:
1. Foreign matter blocks the floor drain
Check the floor drain drainage, you can first see if there is any foreign body blockage, and try to avoid changes in structure and installation. Generally speaking, the washing machine is installed in the bathroom space, and the hair or other fine impurities may block the floor drain with the running water on the floor.
Therefore, when the washing machine is used in the bathroom, special attention should be paid to avoid hair from entering the floor drain when showering or cleaning, resulting in poor water flow, which seriously causes non-drainage and flooding. The reason is to clean up the clogged foreign matter, and then install the floor drain back.
2. The drainage pipe is too high from the ground
Many people often focus on the floor drain and ignore this point: the drainage pipe of the washing machine has a certain height limit from the ground, and if the height is exceeded, it will affect the drainage or even fail to drain the water. As for the height of the drain pipe, the general washing machine is no more than 6 cm to drain the water, and a better brand can do no more than 15 cm.
If the water in the pipe is not clean, the water will deteriorate and produce peculiar smells if the drain is higher than the drain of the solenoid valve of the washing machine, and the normal function of the washing machine will be affected. This height is mainly for the washing machine with the lower drainage method, and the upper drainage method used by the drum washing machine can also be used without floor drainage.
Recently, I noticed that the floor drain next to the washing machine at home was overflowing, so I took out the inner core, thinking that the problem should be solved, but it turned out to be useless.
So what to do? I looked up many methods on the Internet, and found a special treatment method for the wave wheel washing machine, and found it really useful after practice, so you can learn it together.
First of all, take out the sewer pipe of the washing machine for later use.
Prepare a plastic bottle and cut off its head with scissors, taking care not to get hurt.
After the scissors are cut, only the head needs to be kept, and the plastic bottle can be thrown away.
After taking out the head, dock it with the head of the sewer pipe.
Don't push too hard in this step, move softly, and aim the plastic bottle cap at the mouth of the water pipe.
As long as the cap is aligned, it can be firmly inserted into the mouth of the water pipe to fit the two perfectly. This step is best done by the men in the family, after all, it is manual work, and if it is a woman, I didn't say it.
After plugging, you will find that the water nozzle will be much smaller than the previous one, so that you can better control the water flow, which is a good way for parents who have no way to easily change the floor drain.
Plug the treated drain back into the drain and let it work properly.
If none of the above methods work, I recommend using professional dredging methods, such as pipe dredging agents, dredging devices, etc.
In my house, there would be a blockage of sewers and floor drains before, and I hired a maintenance master several times before and after, and spent a lot of money. Later, I heard from a friend that the effect of the pipe dredging agent was good, so I decided to buy one. But there are thousands of pipeline dredging agents on the market, which one should you buy?
After collecting a comparison of multiple brands of pipe dredging agents, it was found that thisPipeline dredging agentThe value for money is the highest. Dredging sewage pipes, removing odors, and maintaining pipelinesIt is effortless to get your hands on, just pour it into the sewage pipe, and you can solve it.
It solves a variety of problems in one bottle, and can quickly dissolve: grease, hair, leftovers, kitchen waste, tea residues, pet hair, flying insects and cockroaches, toilet paper, cloth wool and all kinds of other small blockages.
The main ingredients of this pipeline dredging agent are calcium carbonate, calcium hypochlorite, foaming agent, patented flash dissolution quick-flow factor, etc., which has no obvious corrosive effect on ordinary steel pipes, stainless steel pipes, and PVC plastic pipes, and can be used with confidence when the pipeline is blocked.
It's even easier to use
1. As long as you take about 40 grams of this product (one bottle cap), and then take an appropriate amount of tap water (about 2 times that of the dredging agent) and place them separately, no need to mix and dissolve.
2. Pour the dredging agent into the pipe, and then add water to flush it in.
3. Clean for 5-10 minutes, observe the dredging effect, if not dredged, when operating again, please interval more than 30 minutes!
In order to verify the effect more intuitively, I will show you the real shot, and my mother no longer has to worry about the pipe blockage.
Isn't it even more exciting to read it! It can not only dissolve blockages, but also remove the dirt in the pipes, eliminate mosquitoes, cockroaches, etc., which may breed, and bring protection to our health.
And friends who have used it have said that the effect is indeed very good.
After adding some hot water, after a while, the sewer is already very clear, which is very convenient.
Every family should have several bottles of pipe unclogging agent. Compared to hiring a plumber to repair it, this method is faster, more convenient, and saves a lot of money, and can also save yourself a lot of "dirty work"!
Say goodbye to blockage, take a bubble of Baitong, pass the pipe, remove the odor, just choose it!
Original price99 yuanof the unclogging agent, present readerThe exclusive price is only 69 yuan! Click on the link below to purchase: