Land Rover start-up and flame-out methods.
Safety always comes first before driving any vehicle. Therefore, we must first understand and master the correct starting and extinguishing methods of Land Rover. This not only helps us avoid misuse, but also keeps us safe at critical moments.
1. Land Rover startup steps:
After the driver sits in the driver's seat, he does not need to step on the brakes, directly press the start button, at this time the ACC light is on, and then press more, at this time the vehicle will conduct a self-test.
Press the brake and press the one-button start button to start the ignition.
When you release the foot brake, you can choose to heat the car in situ, which is generally about 30 seconds to 1 minute depending on the model and the temperature.
Fasten your seat belt and confirm that your surroundings are safe, then step on the accelerator and the vehicle will automatically jump gears and you can drive.
Second, the Land Rover flame-out steps:
Press the brakes to bring the vehicle to a smooth stop.
Start by shifting the gear to neutral.
Pull up the handbrake. Directly press the one-button start button to turn off the ignition.
Press the foot brake to turn off the vehicle.
Turn the headlights to low beam and return the steering wheel to its position.
Just pull out the key.
The Land Rover's start-up and start-off steps may seem simple, but they are an essential part of our daily driving. Correct operation can not only ensure the normal operation of the vehicle, but also protect our safety at critical moments. Therefore, every driver needs to be proficient and strictly follow these steps.
In addition, we also need to pay attention to the following points for the starting and extinguishing steps of the Land Rover:
Before starting the vehicle, make sure that the surrounding environment is safe and free of obstacles or dangerous situations. If it is in winter, the car should be warmed up first, but not for too long to avoid wasting fuel.
During driving, the speed of the vehicle should be kept stable and sharp acceleration or braking should be avoided. This not only saves fuel, but also reduces wear and tear on the vehicle.
When parking, you should first apply the brakes, stop the vehicle and then engage the P gear. This can avoid the vehicle from moving or sliding when parking, and ensure the safety of parking.
Before turning off the ignition, all electrical equipment of the vehicle, such as audio, air conditioning, etc., should be turned off. This avoids damage to the vehicle or wasted fuel.
When the vehicle is not in use for a long time, the battery should be disconnected. This can prolong the service life of the battery and avoid affecting the normal start of the vehicle due to battery power loss.
In short, the starting and extinguishing steps of the Land Rover are simple, but they need to be taken seriously. Only by mastering the correct operation method and strictly abiding by it in daily driving can we ensure our driving safety and the normal operation of the vehicle. Search Topic Full Time Challenge in December