1. Scope of application
TVVBPG steel wire tensile shielded elevator flat cable is suitable for elevators and lifting machinery and equipment with AC rated voltage of 300 500V (or 450 750V) and below, and is used as a power supply connection line.
Second, the implementation standard: GB T 50236-2008 and supplemental requirements.
3. The use characteristics of TVVBPG steel wire tensile shielded elevator flat cable
1. The long-term allowable working temperature of the cable conductor shall not exceed 70, and the ambient temperature of laying shall not be less than 0.
2. The installation free suspension length shall not exceed 80m, and the moving speed shall not exceed 4ms.
3. The allowable bending radius of cable laying and installation should not be less than 6 times of the small side of the cable.
TVVBPG elevator flat cable with steel wire shielding.
Product advantages: TVVBPG steel wire tensile shielded elevator flat cable is a wide range of general products in market demand, the quality of this product is clear, long service life, affordable, has been deeply trusted by customers.
Conductor type: The conductor is made of multi-strand finely stranded oxygen-free copper wire, which is flexible.
Insulation characteristics: modified flexible and environmentally friendly PVC material insulation, oil resistance, water resistance, corrosion resistance, high and low temperature resistance, high mechanical strength, excellent chemical stability and dielectric properties, good product performance, safe use.
Use environment: -10 70
Product use: TVVBPG steel wire tensile shielded elevator flat cable is suitable for installation in elevator equipment, as a wire for equipment connection, and can also be used for elevators and other lifting and similar lifting systems.
Product characteristics: 1. The high temperature of the conductor is 70 under normal use, and the product is usually not suitable for use below 0, when the temperature is lower than 0, it can be negotiated between the buyer and the manufacturer, and designed and manufactured according to the customer's technical needs and use conditions.
2. TVVBPG series cables are scheduled to be used for elevators and lifts with a free hanging length of no more than 80m and a moving speed of no more than about 4m s. Elevator cables with increased load-bearing parts are intended to be installed in elevators and lifts with a free suspension length of more than 80m and a moving speed of no more than 10m s.
3. The cable insulated core is numbered and placed in parallel arrangement, the cable structure is soft, the laying and installation is convenient, and the same specifications and sizes can be designed and improved according to customer needs.
4. The rated voltage of the elevator cable is 300 500V with a nominal cross-section of 1 mm2 and below the core wire, and 450 750V with a core cross-section of 1 mm2 or more