The TPP1000 10X Passive Probe is a high impedance probe with 10x attenuation designed for use with the Tektronix FlexChannel. and the MDO3000, MDO MSO DPO4000BMSO DPO5000 series ground reference oscilloscopes.
Connect the probes as shown in the figure below.
Compensating probes
The probe should be compensated after the first time the probe is connected to the oscilloscope, or after the probe tip box has been replaced.
1.Connect the probe to the oscilloscope channel.
2.Connect the probe tip and ground to the probe compensation terminal on the oscilloscope.
Note: When using MMCX tips (206-0663-xx), the tips need to be connected to the probe assembly connector using the following part numbers: 131-9717-xx(1), 196-3434-xx(1). and Article 206-0569-xx, paragraph 2. See Connecting an MMCX Probe to an Oscilloscope Probe Assembly.
3.On flexchannel" Instrument:
a.Double-click the channel badge for the connected probe.
b.Select the probe settings.
c.Select a compensation probe.
d.Select the compensation probe in the pop-up window.
4.On the MSO DPO5000 instrument:
a.Select Vertical probe calibration.
b.Select the Channel tab to connect the probe.
c.In the Calibration section, click Calibrate Probes.
5.About MDO3000 and MDO MSO DPO4000B instruments:
Press the channel menu front panel button for the channel to which the probe is connected.
Press the "More" button until "Probe Settings" is selected.
Press the calibration probe button and follow the on-screen instructions.
If probe compensation fails, verify that the signal and ground connections at the probe compensation connection are secure. Also check that the probe tip is securely grounded, that the rigid, MMCX, or POGO tip is securely seated in the probe tip, and that the hook tip is securely attached to the tip.
The above content is compiled and shared by PRBTEK, Xi'an Puke Electronic Technology Co., Ltd. is committed to the research and development, production and sales of oscilloscope test accessories, covering products including current probes, differential probes, high-voltage probes, passive probes, power ripple probes, flexible current probes, near-field probes, logic probes, power probes and optical probes. It aims to provide users with high-quality probe accessories and create a well-known brand of probe accessories. For more information, please visit Xi'an Puke Technology** for consultation.