Copper repair is an adhesive that is specifically designed to repair defects in copper materials, but there are some common problems that may be encountered during use. Below we will introduce some ways to solve the common problems of copper patches in use.
Poor curing: If the copper repair agent does not cure completely, try increasing the curing temperature or extending the curing time. Also, make sure that the copper repair agent is thoroughly stirred before use and properly formulated in the proportions stated on the instructions. Insufficient strength after curing: If the copper repair is not strong enough after curing, you can try increasing the amount of copper repair or increasing the curing time. At the same time, it is also necessary to pay attention to the surface treatment of copper materials to ensure that the surface is clean, dry and free of oil stains. Insufficient corrosion resistance: If the corrosion resistance of copper repair is insufficient, you can try to choose a repair agent with better corrosion resistance or increase the thickness of the coating. At the same time, it is also necessary to pay attention to the storage and use environment of copper materials, and avoid using them in corrosive environments. Inconsistent color: If the color of the copper repair is inconsistent with the surrounding copper material, try choosing a repair agent that is closer in color or applying a surface treatment. At the same time, it is also necessary to pay attention to the degree of surface oxidation of copper materials and avoid using materials that have already been oxidized. In short, solving the common problems in the use of copper repair agents needs to be judged and dealt with on a case-by-case basis. In the process of use, it is necessary to pay attention to the operation in accordance with the requirements on the manual, pay attention to the safety protection and use environment, deal with and solve the problem in a timely manner, and ensure the use effect and safety of use.