To set the number of prints on your Zebra 110xi4 printer, you can follow these steps:
Set the number of prints.
1.Prepare the printer:
Make sure the printer is turned off.
Remove the paper and media.
2.Turn on the printer:
Turn on the printer's power switch and wait for the printer to be ready.
3.Open the printer lid:
Gently open the front or top cover of the printer (depending on the printer model).
4.Installation Paper:
Install the paper or label correctly depending on your media type.
If it's continuous paper, make sure the paper is straight and free of creases.
If it's a label, make sure there's enough spacing between the labels for the printer's sensor to recognize.
5.Set the number of prints.
In the default interface, press the "Setup Exit" key once.
Press the " (previous)" key to find the "Print Quantity" or similar option. This option may be in the "Basic Settings" or "Print Settings" submenu.
Use the arrow keys to move to the location where you need to enter the number, and then use the "+" or "-" keys to change the numeric value to set the number of prints you want.
When you're done setting up, press the " (next s**e)" key to save the settings and return to the main menu.
6.Test Print:
Print a test page to confirm that the settings are working correctly.
Please note that different versions of the operating system and drivers may have different menu structures and option names. If you encounter difficulties in the above steps, it is recommended to refer to the official user manual or contact Zebra's technical support for assistance.
In addition, the Zebra 110xi4 is an industrial-grade barcode printer that is typically used for label and barcode printing in high-volume production environments. Therefore, depending on your actual needs, you may also need to adjust other parameters such as printing speed, resolution, etc., to get the best results.