H62 brass seamless pipe is a high-quality pipe with excellent corrosion resistance and mechanical properties. It is made of high-quality H62 brass material, and has undergone precise processing technology to ensure that the inner and outer surfaces of the pipe are smooth and flat, without pores, sand holes and other defects.
The H62 brass seamless tube has uniform wall thickness and high precision, which can meet various high-demand occasions. It has strong tensile strength and compressive strength, can withstand large compression and tensile force, and is not easy to deform and bend. In addition, the tubing has good thermal conductivity and durability, allowing it to retain its performance and appearance for a long time.
H62 brass seamless pipe is widely used in petroleum, chemical, electric power, shipbuilding, pharmaceutical and other industrial fields. It can be used for a variety of purposes such as transportation pipelines, fluid pipelines, heat dissipation pipelines, etc. Due to its excellent performance and reliability, H62 brass seamless pipe has been widely used and recognized.
In the process of manufacturing H62 brass seamless pipes, advanced production technology and equipment are adopted to strictly control the quality of each production link to ensure the quality and performance of the pipes. The manufacturing process of the pipe includes hot rolling, cold rolling, drawing, straightening and other processes, each process is strictly tested and controlled to ensure that the quality and performance of the final product meet the requirements.
Grade: H62 brass seamless tube
Compatible with standard GB
Brass seamless tubes
standard specification for seamless brass tube
Classified as copper and copper alloys
Tags: Brass seamless pipe
Description The dimensions and their allowable deviations are shown in ASTM B251 B251M standards. astm b135/b135m-2017
H62 chemical element composition content (%)
Ingredient Fe Cu Pb more
Minimum - 59 - zn: margin
The maximum value is 007 63 0.09
cu+997%
H62 mechanical properties
Outer diameter;Wall thickness, heat treatment or state, tensile strength, hardness
d；t σb hbw
mm mpa
All specifications General requirements of drawing H58 370 hr(30t): 55
t≤0.08 Mild annealing O50 hr(30t): 60
t＞0.08 Mild annealing O50 hrf: 90
The average grain size of the softened annealed (O60) tubing should be 0025 mm 〜0.060 mm, the average grain size of the lightly annealed (O50) state pipe should be 0035 mm 。
Light drawing, light cold rolling, and drawn hard tempering are only used for round pipes.