Founded in 2012, Menghao is a large-scale comprehensive advertising company integrating design (planning) production, installation, maintenance and release.
The production of acrylic luminous words is generally determined according to the font size and the complexity of the production, etc., and the following are some factors that affect the **
1.Material costs. Unlike regular billboards, its high strength, light weight, and light transmission make it ideal for electronic devices. However, these advantages have also led to an increase in its material costs. For some large displays, the cost of plexiglas materials can account for up to 40% of the overall project cost.
2.The process difficulty leads to higher labor costs, due to the expensive cost of special-shaped groove blister machine (350,000 units), coupled with the low frequency of use (mainly suitable for the image of the door), many small scale engraving and proofing factories do not have this equipment and can not complete the processing of this kind of words;Larger sizes of products also involve lifting and transporting issues. Therefore, many manufacturers refuse to undertake such projects or increase the price of their products. This adds a lot of labor costs for production and installation. All of the above reasons are the reasons for the thickening of the empty part of the finished light box. This is also the main reason why similar products on the market have different thicknesses but the same brightness. (The so-called card edge) is actually a normal lacquered surface that is straight). If the customer needs a flat gloss effect on the front, it is necessary to seal the front with transparent plexiglass before spraying or branding silver dots or films. If you don't require brightness and three-dimensionality, you can also use a frosted stainless steel plate, the surface is treated like fog, which can not only achieve a good coverage rate but also accept the lowest cost, which can be described as a cheap and high-quality materialHowever, the disadvantage is that it is not stable enough and cannot achieve any carving on the panel). Stainless steel is harder, and the cost of drilling is additional). As for the color, it can be subject to the actual color difference of the customer. (Warning: Please note that the color standards of local standards may vary from city to city when purchasing).