I believe we all know that the combustible gas alarm is a kind of gas detection equipment for detecting the leakage concentration of combustible gas, which mainly uses sensors to detect the type, composition and content of combustible gas in the environment, which is very suitable for continuous detection of combustible gas concentration in various industrial environments and special environments. So do you know where the combustible gas alarm should not be installed?Below Yiyuntian Electronics:
Combustible gas alarms should not be installed in the following locations:
1. Places directly affected by steam and oil smoke:
These substances can coat the sensor, affect its sensitivity, and even cause the combustible gas alarm to not work properly.
2. Places with large air flow such as air supply outlets, ventilation fans, and doors
Excessive air flow in these areas can interfere with the normal readings of combustible gas alarms, resulting in distorted measurements.
3. Where there are many water vapor and water droplets (relative humidity 95%RH):
These places have high humidity and are prone to water mist formation inside the combustible gas alarm, resulting in short circuits or sensor failures.
4. Where the temperature is below -40 or above 55:
Too low a temperature will cause the internal circuit of the combustible gas alarm to work abnormally, while too high a temperature may cause damage to the sensor.
5. Where there is a strong electromagnetic field:
The magnetic field interference in these places is strong, which may affect the normal operation of the combustible gas alarm.
To sum up, these are the locations where combustible gas alarms should not be installed. In order to ensure the proper operation of the instrument and prolong its lifespan, it is important to avoid installation in the above environments.