Construction steps of cement chimney brush buoy.
Click here to get professional customer service for you!
1. Construction preparation.
1.Determine the scope and target of construction: According to the requirements of the navigation beacon and the actual situation of the chimney, determine the scope and target of the navigation beacon that needs to be brushed, including the color, size, and location of the navigation beacon.
2.Prepare construction materials: According to the construction requirements, prepare the necessary construction materials, including navigation paints, brushes, scaffolding, etc.
3.Inspect the equipment: Inspect the equipment required for construction to ensure that the equipment is intact and can work properly.
4.Formulate the construction plan: according to the construction requirements and the actual situation, formulate a detailed construction plan, including construction steps, safety measures, quality standards, etc.
Second, the construction steps.
1.Erection of scaffolding: According to the height and width of the chimney, appropriate scaffolding is erected to ensure the safety of construction personnel.
2.Clean the chimney surface: Use tools such as a brush or high-pressure water gun to clean the chimney surface from dust, dirt, and other impurities to ensure that the chimney surface is clean and flat.
3.Primer: Apply a layer of primer on the surface of the chimney, and the primer should match the buoy paint to ensure the painting effect.
4.Painting navigation paint: After the primer is dry, paint the navigation paint according to the requirements of the navigation mark, and the paint should be evenly applied to the surface of the chimney to avoid missing or uneven painting.
5.Inspection and acceptance: After the painting is completed, a comprehensive inspection of the navigation beacon is carried out to ensure that the color, size, and location of the navigation beacon meet the requirements, and the construction quality is accepted.
6.Clean up the site: After the construction is completed, clean up the site, including scaffolding, waste cleaning, etc.
3. Security measures.
1.Strictly abide by the safety operation procedures: The construction personnel must strictly abide by the safety operation procedures and wear safety helmets, safety belts and other protective equipment.
2.Regular inspection of equipment: Regularly inspect construction equipment to ensure that the equipment is safe and reliable.
3.Set up warning signs: Set up obvious warning signs on the construction site to remind other personnel to pay attention to safety.
4.Strengthen personnel training: Strengthen training for construction personnel to improve their safety awareness and operational skills.
Fourth, quality standards.
1.Bright and full navigation color: The color of the navigation beacon should be bright and full, and the navigation beacon information can be clearly displayed.
2.Accurate navigation size: The size of the navigation beacon should be accurate and meet the design requirements.
3.Accurate navigation position: The navigation beacon position should be accurate and able to guide the navigator correctly.
4.Good painting quality: The painting quality should be good, no leakage, no bubbles, no cracks, etc.
5.Meet environmental protection requirements: The construction process should meet environmental protection requirements to avoid pollution to the environment.
5. Precautions.
1.During the construction process, you should pay attention to weather changes and avoid construction in bad weather.
2.Construction personnel should pay attention to their own safety and wear protective equipment.
3.During the construction process, attention should be paid to protecting the surrounding environment and avoiding pollution to the environment.