DDR5 overclocking is really too rolly,A year or two ago, everyone was still impacting 7200MHz,6800MHz is still UHF,See that in the past few months,Many memory manufacturers have launched 6000MHz、 6400MHz, the most is 6800MHz, the beginning is already the ashes of the original DDR5 platform, D5 overclocking is 8000MHz per capita, we look at all kinds of overclocking sharing on the Internet, without exception, are easy to overclock to 8000MHz Is it really that easy to overclock 8000MHz?
I don't think so, it's really not easy to stabilize 8000MHz. If you want to reach 8000MHz, CPU, motherboard, and memory are indispensable, just like the barrel effect, and it is difficult to reach 8000MHz if one of them does not meet the standard.
This time, let's use the new version DDR5 DDR5-6800 to experience overclocking.
At present, the high-frequency DDR5 memory modules are basically used in Hynix A-Die particles, as the memory particles with the strongest overclocking potential, they can basically be stably overclocked to more than 7600 in the Intel 13th generation and above, and 8000MHz can also be stable on the high-end platform of large manufacturers.
Jiuhe packaging used color packets, and also invited badminton world champion Sun Yu as a spokesperson.
The Jiuhe Star Dance series uses Hynix A-Die particles, the on-board PMIC chip does not lock the voltage, the memory frequency is 6800MHz, and the main timing is CL34-45-45-108, which is a new version after the optimization of the timing of Jiuhe.
Jiuhe's series of memory uses a white heat dissipation vest,On its vest is also printed with the original two-dimensional character image of Jiuhe"Star Dance",Now computer hardware is very popular to play pure white two-dimensional theme,Jiuhe Star Dance is very suitable,White metal heat dissipation vest with anime beautiful girl image,Very eye-catching,The appearance is very high。。
The light guide strip is made of acrylic material similar to the diamond-cut design, and the light transmittance is very good, and this design is still unique in the current market, very similar to the G.SKILL Royal Halberd in the DDR4 era.
The processor and motherboard are i7 14700kf with GIGABYTE Z790 Xiaodiao X, which is currently the most cost-effective overclocking motherboard in the 2000+ price range.
Basically, on this platform, the memory modules of Hynix ADiDie chips can be overclocked to more than 7800MHz.
My 14700kf Gigabyte biscuit score is OK, with nearly 94 points, and this 14700kf is still a loose piece that I started when I first started. It is said that the first batch of 14700kf is the worst performance of the 14th generation of the system, and my one is not bad, and many friends start with 14900kf biscuits.
Every time Intel releases a new platform, there will always be people who say that the new pieces are taken out of the box and tested to be in poor health, so they will be sold as pieces. In fact, it's quite nonsense, dismantling the box and selling it as a loose piece is not a self-lowering price, and the profit is reduced, and the merchant may not be so idle to pick one by one.
By turning on the memory XMP preset and GIGABYTE Black Technology's "High Bandwidth and Low Latency Technology", the read and write performance has been improved to 104GB S, which can touch the performance level of 7200MHz, because the parameters will not be optimized under the XMP preset, and the timing is also quite wide, and the motherboard will automatically optimize the parameters after turning on the high bandwidth and low latency, which is of great help to the read and write speed and latency.
The new generation of GIGABYTE Z790 Xiaodiao X has a lot of built-in XMP presets, in order to touch whether this memory module can go up to 8000MHz, we can turn on the 8000MHz preset with one click, and turn on the high bandwidth and low latency, you can directly boot into the system, we ran the AIDA64 memory and cache test, the preset performance of the motherboard is also very good, although the main timing is relatively wide, after turning on the black technology, the delay can be pressed to less than 60ns, and the read and write speed is increased to 120GB S up and down.
The built-in XMP parameters of the motherboard are actually not stable enough, because this set is for 16G single overclocking parameters, the voltage is not high, and the difficulty of overclocking is actually relatively high if it is dual 16G.
First we overclocked the CPU to 56G big core, small core does not move, ring multiplier 50, ring doubling overclocking can effectively improve the performance of three slows and reduce memory latency.
In the process of memory overclocking, the CPU can not be overclocked too hard, too high voltage leads to too high temperature and affects the stability of memory, like we are given 1The 25V core voltage is actually very low, which will not affect the memory overclocking process and the CPU performance can be slightly improved.
The set of DDR5 Star Dance DDR5-6800 overclocked to 8000MHz, the main timing is compressed to the low timing of overclocking, 34-48-48-56, the small parameters are also optimized according to the general scheme on the Internet, and the final read and write speed can reach 12419GB s and 12269GB s, the latency is relatively low, and it can be pressed up to 569ns。
Overclocking this thing wants to achieve stable use, it is really not easy, look at online digital bloggers overclocking 8000 in minutes, often it takes a few hours or even a few days to explore the voltage, even if overclocked to 8000, daily use also needs to actively dissipate heat, and there will be unstable situations.
Speaking of the Juhor Star Dance series DDR5-6800 memory module with excellent appearance, reasonable XMP parameters preset by the manufacturer, excellent compatibility, and good overclocking potential on the Z790, for ordinary gamers, 6800MHz daily use is very good. 7200-7400 is a very good dessert frequency. If you want to install a pure white two-dimensional theme host, Nine Star Dance is a good choice.