During this time, I checked my friend's reply and found that many friends were not very clear about the high bearing weight of the circular armor seam, so let's talk about the issues that everyone is more concerned about.
Circular armor seam high load-bearing is a high-strength metal armor seam used for laying railways, highways and other large load-bearing places. It is usually made of steel and has excellent load-bearing and durability, allowing it to withstand heavy traffic and a large number of objects passing through. Here's a more in-depth breakdown of its installation and maintenance.
The high load-bearing capacity of the circular armor seam is mainly composed of the following parts: upper cover plate, lower plate, side plate, bending plate, support steel plate and joint hook, etc. These parts are all made of steel and can be customized in size and thickness as needed.
The process of installing a circular armor seam for high load-bearing includes the following steps:
1. Preparation: confirm the installation location and size, and clean the installation ground to ensure smoothness. Also prepare the tools and materials you need.
2.Laying the bottom layer: First lay the appropriate amount of mortar or concrete on the installation ground to level the surface.
3.Install the lower plate: On the laid bottom layer, lay the lower plate in turn to ensure that it is smooth and firm, and connect it with bolts or welding.
4.Install the side plate and the bend plate: install the side plate and the bend plate in turn, and connect with the lower plate to form a complete circular structure. Use screws or welding at the joints for fixing.
5.Installing Support Steel Plates: Inside the circular structure, supporting steel plates are installed to provide better load-bearing capacity. The support steel plate is connected and fixed with the side plate.
6.Install the upper cover: Install the upper cover on top of the circular structure, ensure that it is flat and connected with other parts.
The key to maintaining the high load-bearing capacity of the circular armor seam is regular inspection and maintenance, including the following aspects:
1. Cleaning: Clean the armor joints regularly to remove dust, mud and other debris. It can be cleaned with clean water and a soft brush, avoiding acidic or corrosive cleaners.
2.Check the connection: Regularly check the connection status of the armor seam and the supporting steel plate to ensure that the fastening bolts or welds are not loose or damaged. If there is a problem, repair or replace it in time.
3.Repair the damage: If any damage to the armor seam is found, such as breakage, deformation, or wear, etc., it should be repaired or replaced in a timely manner. Depending on the situation, parts can be welded, reinforced, or replaced.
4.Prevent corrosion: Regularly inspect the surface coating of the armor seam and reapply the protective layer in time if corrosion or wear is found to prolong the service life.
Through the above operation and maintenance, the high load-bearing capacity of the circular armor seam can maintain good performance and reliability, ensuring the safety and durability of the load-bearing place.