What is a turn-mill compound CNC machine?How to get started
Turning and milling compound CNC machine tool is an advanced processing equipment, which combines the two processing methods of turning and milling, realizes the completion of a variety of processing operations in a clamping, and improves the processing efficiency and machining accuracy.
Turn-milling compound CNC machine tools usually have the characteristics of high precision, high efficiency, and high degree of automation. It adopts advanced CNC technology, which can achieve precise machining control and highly automated operation. On the turn-milling compound CNC machine tool, the workpiece can complete a variety of processing operations such as turning, milling, drilling, and tapping in one clamping, which greatly shortens the processing time and improves the production efficiency.
In addition, the turn-mill compound CNC machine tool also has high-precision machining capabilities. It uses high-precision tools and measuring systems to achieve micron-level machining accuracy to meet the machining needs of various high-precision parts. At the same time, the turning and milling compound CNC machine tool also has a high degree of automation, which can automatically complete the whole process of clamping, processing, and measuring the workpiece, reducing manual intervention and improving production efficiency and quality.
Those who have touched the ultra-precision machining center should know that it is very easy to produce oil leakage in the whole process of CNC machining. In fact, it is very easy to see the oil leakage in the CNC machining management center. It is mainly caused by the leakage of cylinder oil in spare parts or machining centers. If it is a spare part, the maintenance is relatively simple. If it is a cylinder, it is very inconvenient and may cause damage to the equipment.
When the oil change of the turn-milling compound CNC machine tool does not meet the regulations, it usually causes oil leakage in CNC machining. The problems that occur in the oil change are manifested in three levels.
1. For parts with low-viscosity grease, if you change the oil with high-viscosity grease, the sealing characteristics of the corresponding shell and hole shaft will be harmed, and it is also likely to greatly reduce the airtightness of this part.
Second, if the car fuel tank is not cleaned when the oil is changed, the waste in the car fuel tank will likely enter the lubrication system, blocking the oil passage and damaging the hydraulic seals, resulting in oil leakage.
3. The amount of oil is too much when CNC lathe is processed for oil change, especially in the parts with rotating parts, because of the stirring effect of rotating parts, it is more likely to cause oil leakage.
The use and adjustment of lubrication system parts are unreasonable and cause CNC machining oil leakage, for example, CNC machining maintenance personnel use a gasoline pump with too high working pressure or too much oil during maintenance, or when adjusting the working pressure of the system software, the working pressure adjustment of the speed regulating valve, valve, pressure regulating valve, etc. is too high, and the total flow of the lubrication system of the CNC lathe is too large and the pump oil system software and its sealing system software are not consistent, which will lead to oil leakage.
In fact, the cause of oil leakage during the processing of the turning and milling compound CNC lathe is not only the above aspects, if we encounter similar problems in the process of operating the CNC machining of the lathe, we must carefully do a good job of inspection, immediately find out the cause of oil leakage in CNC machining, and prevent unnecessary damage.
In terms of application, turning-milling compound CNC machine tools are widely used in various fields such as automobiles, aviation, energy, and electronics. It can process a variety of complex parts and structural parts, such as engine parts, aero engine parts, solar panel brackets, etc. At the same time, due to its high precision and high efficiency, turning and milling compound CNC machine tools have also become one of the indispensable and important equipment in modern manufacturing.
In short, the turn-milling compound CNC machine tool is an advanced processing equipment with the characteristics of high precision, high efficiency and high degree of automation. Its emergence has brought a huge impetus to the development of modern manufacturing, providing more efficient and accurate solutions for the processing of various complex parts and structural parts.
1. Safety operation procedures.
Before operating the CNC lathe, it is necessary to carefully learn and Xi and comply with the safety operation procedures. First of all, it is necessary to wear corresponding labor protection equipment, such as protective glasses, protective gloves, etc. Secondly, check whether there are any obstacles around the machine and make sure that the work area is neat and clean. Finally, it is necessary to understand and master the emergency handling methods in an emergency.
2. Start-up preparation.
Before turning on the machine, you need to check whether the power supply is normal and whether the machine tool is well grounded. At the same time, according to the requirements of the machine tool instruction manual, the parameters should be set correctly, including the working origin, tool compensation, etc. In addition, the machine tool should be lubricated and maintained to ensure that all parts of the machine tool move flexibly.
3. Programming Basics.
The machining of the CNC knife row machine needs to rely on programming to achieve. Beginners can learn the basic knowledge of Xi G** and M**, and master the functions and usage of commonly used G** and M**. At the same time, it is necessary to understand the basic structure of CNC programs and master how to write simple processing programs. Before turning on the machine, you need to check whether the power supply is normal and whether the machine tool is well grounded. At the same time, according to the requirements of the machine tool instruction manual, the parameters should be set correctly, including the working origin, tool compensation, etc. In addition, the machine tool should be lubricated and maintained to ensure that all parts of the machine tool move flexibly.
Fourth, the operation interface.
The operation interface of the CNC lathe includes a display screen, a keyboard and an operation panel. Beginners need to understand and familiarize themselves with the features and usage of these interfaces. For example, the display can show information such as the current working status, tool position, etc.;The keyboard can be used to enter a variety of instructions and parametersThe operator panel can control various movements of the machine.
5. Basic operations.
In short, the introductory operation of CNC lathes needs to be learned and Xi practiced from the aspects of safety operation procedures, start-up preparation, programming basics, operation interface and basic operation. Only by mastering these basic skills can we better cope with various problems in practical work.