Vacuum pump is a common equipment commonly used in industrial production, and the equipment will have operational failures and need to be repaired in long-term use. This article will explain in detail how to repair the vacuum pump from several aspects such as cleaning, replacing parts, checking the pipeline, etc., so that you can not worry about dealing with vacuum pump failures.
1. Clean the vacuum pump.
Before using a vacuum pump, it must be cleaned. First, the pump head needs to be rinsed with clean water, and then the surface needs to be wiped and disinfected with alcohol or formaldehyde. After cleaning, the pipes, valves, and accessories also need to be inspected for problems. If there is damage or blockage, it needs to be repaired or replaced promptly.
2. Replace parts.
If there is an abnormality when using the vacuum pump, it is most likely caused by damaged parts. Through observation and testing, it is possible to determine which parts need to be replaced. Common parts that need to be replaced include bearings, seals, mechanical seals, motors, and more. When replacing, you need to disassemble it according to the instructions first, and use special tools to ensure that other parts will not be damaged during the replacement process.
3. Check the pipeline.
The normal operation of the pump requires the pipeline to be unimpeded, so it is necessary to pay attention to check whether the pipeline is blocked or leaking during use. If something goes wrong, it needs to be dealt with promptly. First, you can try cleaning the pipes with compressed air. Then, check that each connecting part is tight to avoid air leakage. In addition, the filter needs to be replaced or cleaned regularly to keep the lines open.
4. Repair the motor.
The motor is one of the core parts of the vacuum pump, and its normal operation directly affects the working effect of the whole pump. If there is a motor failure, it needs to be overhauled in time. Common motor failures include motor leakage, poor bearings, burned-out windings, etc. When servicing a vacuum pump motor, you need to pay attention to safety, and at the same time, you also need to choose the right repair method according to the type of motor.
The above is for the vacuum pump fault maintenance from cleaning, replacing parts, checking the pipeline, motor maintenance four aspects of the repair, I hope to deal with the vacuum pump fault maintenance will be of great help!