In the decoration process, a large amount of construction waste will be generated, such as waste bricks, waste cement, waste steel bars, waste wood, etc. Not only does this garbage take up a lot of land, but it can also cause serious pollution to the environment if it is not disposed of properly. So, what should we do with this construction waste?
First of all, we need to be clear that the disposal of construction waste is not a simple matter. It requires a series of measures to ensure that waste can be disposed of effectively. One of the most important measures is waste sorting. Before decoration, we should divide it into ** garbage, hazardous garbage, dry garbage and wet garbage according to the different types of garbage. The purpose of this is to facilitate the subsequent processing work.
For the garbage, such as scrap steel bars, scrap wires, etc., we can collect them and send them to the scrap collection station for reuse. For hazardous waste, such as waste paint, waste batteries, etc., we need to send it to a special hazardous waste treatment center for disposal. For dry and wet waste, we can separate it and collect it and send it to the corresponding waste disposal center for further processing.
In addition to garbage separation, there are a few other measures that we need to take. For example, for some large-volume construction waste, such as waste bricks, waste wood, etc., we can crush, grind and other treatments to convert it into small building materials, such as crushed stone, sand, etc. This not only reduces the volume of waste, but also converts it into useful building materials and enables the reuse of resources.
In addition, we can also dispose of construction waste in landfills. Before landfilling, we need to compress the construction waste to reduce its volume and weight. At the same time, we also need to have a leakage barrier and leachate collection system around the landfill site to prevent waste from contaminating groundwater and soil. During the landfill process, we also need to continuously compaction to ensure that the waste can be sufficiently compressed and stabilized.
In addition to the above two treatment methods, we can also incinerate construction waste. In the incineration process, construction waste will go through processes such as high-temperature combustion and flue gas treatment, which will be converted into high-temperature steam and residues and other substances. At the same time, we can also convert it into thermal energy resources by means of high-temperature steam. However, it should be noted that some harmful gases and soot and other pollutants will be produced during the incineration process, so corresponding environmental protection measures and control standards need to be taken.
To sum up, the disposal of construction waste is a very complex job, and a variety of measures need to be taken to deal with it. The construction waste generated in the renovation process needs to be disposed of differently according to different types. At the same time, it is also necessary to pay attention to prevent garbage from causing harm to the environment and human health. We should take active measures to reduce the generation of construction waste and pollution to the environment.
The above is the "How to deal with the construction waste of decoration?".I hope it can help you create a little bit of attention, and your attention is the greatest support!There are more decoration knowledge on the homepage, you are welcome to check it out!