The 829 series intelligent heating thermostat has a weekly programming function, which can set six periods and the corresponding set temperature every day, and can choose the operation mode of manual control or temporary control. The unique remote control function is easy to operate, energy-saving and environmentally friendly, and is suitable for electric heating equipment control for electric heating and electric drive valve control for water system heating.
First, the technical parameters:
Power supply voltage: 220VAC, 50 60Hz
Load current: 3A, 16A, 20A, 30A (depending on model).
Self-power consumption: <1W
Temperature sensor: NTC
Temperature switch deviation: 1 (1 5 adjustable).
Temperature range: 5 45 (upper limit adjustable, 45 95).
Temperature limit: 5 60 (external sensor).
Temperature control accuracy: 1
Ambient temperature: -5-50
Degree of protection: IP20
2. Display description
3. Function Description:
Manual work mode:In manual mode, the heating device can be controlled according to the temperature currently set manually.
Programming Working Mode:The thermostat automatically runs according to the set time period and temperature, and the programmed working mode is divided into four time periods and the corresponding four time period temperatures, and the icons of each time period are described as follows.
Manual, programmed simultaneous display:Indicates the temporary control mode, press the " or " " " key in the programming mode to enter the mode, the thermostat is temporarily out of the current period control, and is temporarily controlled by the manually set temperature. When the next period comes, it automatically reverts to programmed control mode.
Fourth, the key function:
Weekly programming mode parameter setting:
When the device is turned on, press and hold " at the same timeClock keys"And".Power button"5 seconds, enter the weekly programming setting mode, and adjust the order as:
Monday 1st period timed time adjustment Monday 1st period timed temperature adjustment ....Sunday 6 period time adjustment Sunday 6 period timing temperature adjustment, each parameter after the setting press the mode button".m"Switch to the next parameter setting, flash the parameter to be set, press the up button "and the down button" to adjust, the amplitude of each adjustment is 15 minutes, wait for 10 seconds after the adjustment is completed, and save it automatically.
See the table below for details, and the start time of each period shall not be greater than the start time of the next period).
5. Advanced Options:
In the power-off state, press and hold " at the same timeClock keys"And".On-off key"5 seconds, enter the advanced option setting mode, the screen displays the parameter items and default values, press".or"key to adjust the parameters, press ".M key"Toggle the next advanced option, press when you are done adjusting".On-off key"Save.
6. WiFi connection instructions and precautions:
This feature is optional and only available on WiFi models
(1) Precautions:
1. The wireless network where the mobile phone is located has a good signal and is installed with the "smart life" application software
2. When connecting for the first time, the thermostat and the mobile phone must be in the same wireless network and the signal must be good
3. Once successfully connected, the wireless network where the thermostat is located shall not be replaced, otherwise it needs to be reconnectedThe mobile phone can be replaced with mobile data or other wireless networks, that is, as long as the mobile phone has a network, you can log in to the APP for remote control.
(2) Connection Description:
1. Open the mobile phone WeChat, scan the picture *** or open the mobile phone "App Store", etc., search".Smart living
2. Install according to the instructions".Smart living"Application software.
3. Open".Smart livingFollow the instructions to create a new account and log in.
4. As shown in the figure, click ".Add a deviceor in the upper right cornerto add the device.
5. As shown in the figure, click " on the leftSmall appliances, and then selectSmall appliances"On the right".Thermostat(Do not select the wrong option, otherwise you will not be able to connect successfully).
6. As shown in the figure, press and hold the thermostat at the same timem"And"."key, up to the display".Wireless signal icon"Flash, tap again".Confirm that the light is flashing quickly
7. As shown in the figure, make sure that the wireless network signal of the mobile phone and the thermostat is good, enter the wifi password of the current mobile phone connection, and then click ".Confirm"Make the connection.
8. As shown in the figure, wait patiently, the phone will automatically connect with the thermostat.
9. After the connection is successful, click ".DoneIf the connection is not successful, repeat the above operation, or log out of the APP and wireless network again, and finally try to disconnect the power supply and re-power supply until the connection is successful.
10. As shown in the figure, the connection is successful, select the device, and enter the operation interface.
7. Wiring diagram
829 water heating thermostat, 928 gas wall-hung boiler thermostat
829 electric heating thermostat