The appearance of water vapor inside a watch is usually caused by a decrease in water resistance or a poor sealing of the case. In order to remove the water vapor inside the watch, here are a few things you can try:
1.Bask in the sun to remove water mist: Unplug the head of the watch, plug it with toilet paper or flannel, and take it to the sun for about 5 hours, and the toilet paper or flannel plug can remove the water vapor in the movement, so as to prevent water from entering for a long time, the dial is overcolored, and the movement is rusty. If there is a little fog by chance, it will disappear naturally when the climate is dry.
2.Wear the watch backwards: You can also put the surface face inward, the bottom shell face outward, and wear it on the wrist, and the moisture can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.
3.Silicone water absorption method: Put the silicone and the watch in water into a closed container, and after a few hours, take out the watch again, and the water mist in the watch will disappear.
4.Blow dry with a hair dryer: The temperature is not too high, and the moisture on the glass is not visible until the temperature is not too high.
5.Rice jar to remove water mist: Put the rice followed by the water watch into the rice tank, the rice has the function of absorbing water, after a period of time, and then take out the watch, you will find that the water mist in the watch has disappeared.
6.Bake hot with a bulb: If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating.
If none of the above methods solve the problem, or you are not sure how to proceed, it is best to take your watch to a professional repair shop to have it processed. They have more specialized tools and techniques to deal with this kind of problem and can prevent further damage to the watch.