With the continuous progress of the times, people like to install some word floor tiles at home, which will be more convenient. And it is also beneficial to our life, however, if the floor tiles are used for a long time, there will be some scale, which will affect the overall texture and beauty, and will affect our future life. Today, I will take you to understand how to clean the scale on the floor tiles, the scale on the floor tiles is too stubborn and difficult to clean, look at these practices, and easily remove no water stains.
1. It is easy to make the floor tiles yellow, the ground will be unsightly, and the living room will be dirty, which will affect the overall aesthetic effect, and seriously affect the service life.
2. It will reduce the waterproof power of floor tiles. If the waterproofing of the floor tiles is not in place, it is easy to cause external pollutants to enter the inside of the floor tiles.
3. After being used for a long time, the floor tiles are prone to shelling and falling off.
1. Acidic solution method
Take an appropriate amount of acidic solution and water and mix it in a certain proportion, dip it with a brush, brush it again, brush it back and forth several times, and finally rinse it with water. The acidic solutions on the market include oxalic acid, hydrochloric acid, phosphoric acid and other solutions, and gloves should be worn before cleaning the scale, because acidic solutions will be more or less corrosive.
2. Soap method
Prepare soap, add a small amount of ammonia and a certain amount of turpentine mixture, dip it with a brush, and then rub it back and forth on the scale several times, and finally wash it with water. This cleaning method can make the surface of the floor tiles more shiny and brighter.
3. Daily cleaning
Step 1: First of all, prepare the cleaning tools, mainly sponge mop, watering can and the corresponding detergent for the stains on the floor tiles.
Step 2: Before mopping the floor, fill the watering can with water and spray a small layer evenly on the floor tiles, not too much. After sprinkling, wash the sponge mop, squeeze the water out of the mop head, and then mop the floor tiles normally. Because the ground is sprinkled with water, it is very easy to drag the ground, and it is very fast, because the water has been soaked on the floor for a while, and the dirt on the ground becomes easy to drag off.
Step 3: For special stains, you can spray some special detergents and let stand for five minutes. Then use a slightly rougher gauze (towel) or brush to scrub the stain, as for what cleaning solvent to choose, it depends on the type of stain on the brick surface, and the specific choice can be made according to the above situation. Step 4: Scrub the stains clean, after mopping the whole thing, the mop will be dirty, then you should wash off the dirt on the head of the mop and squeeze it dry. Finally, after squeezing out the water from the cleaned sponge mop, take a quick walk on the ground after mopping, which will absorb the excess water on the ground, and clean the place that was not mopped for the first time, and clean it again, the effect will be very good!
1. Clean surface. Depending on the nature of the stain, it can be removed with the appropriate detergent. Detergent can remove stains on the surface, but the acid and alkali components contained in it will corrode the tile, can not be used too much, you can use a neutral detergent, such as household dish soap, soap to clean, soap can add a little ammonia and turpentine mixture, wipe to make the tile more shiny.
2. Gap treatment。In general, a lot of dirt and bacteria accumulate in the cracks, and generally the dirt is putty or white cement, and it is difficult to clean if it adheres to it. We can use a brush brush to brush a waterproof agent at the fine seam, which can play a waterproof and mildew-proof role.
3. Wear and tear repair. Usually in the process of use, or because of friction, stains caused by uneven surface phenomenon, you can wax the floor tiles, wax every two or three months, not only to ensure the luster, but also to prolong the service life.
I believe that everyone should encounter a problem when cleaning the bathroom, that is, there are a lot of water stains on the glass partition of the bathroom, and these water stains are very difficult to clean.
Especially on the mirror in the bathroom, as well as on the faucet and other supplies, it is easy to have water stains and scale, and it is very uncomfortable to look at him every time, and it is very time-consuming to clean it every time.
I used to use glass cleaner to clean him when I cleaned him, but the glass partition in the bathroom was too large, and I had to use one or two bottles of glass cleaner to clean it every time I cleaned it, which was a waste of money.
Later, I saw that many Internet celebrity bloggers were pushing citric acid descalers, which are not only practical, but also cheap, and a large bottle is also food-grade citric acid. Compared to other chemical detergents, its safety is satisfactory!
Use it to make your own glass cleaner, and no matter how difficult the glass is, you can use it to clean it. It's as easy as adding 500ml of hot water to a watering can, scooping in two spoonfuls of citric acid, and when it's cooled, you'll have a bottle of glass cleaner.
Because dust, scale, and water stains are all alkaline, with acidic citric acid, it can play an acid-base chemical reaction and dissolve water stains and scale. Therefore, spray some on the glass and wipe it with a rag to wipe the glass as bright as new.
And its biggest advantage is that it is safe, citric acid is found in plants and fruits, and citric acid is also used in some food additives. It may not be good to use at first, because it is gentler than some strong acid scale removers, so the results are not immediate.
But it is precisely gentle so that it does not volatilize harmful gases during use. Although the scale removal is a little slower, it will not be too slow, spray it on the glass, shower head, faucet, bathroom corner and other areas with scale, let it stand for about 10 minutes, and then wipe it with a fish scale cloth to easily remove the scale.
In fact, many descalers react quickly and have high cleaning efficiency, but they will volatilize harsh and pungent gases when used.
Citric acid because of its safety, can also be used to remove the scale at the bottom of the kettle, add citric acid powder to the water and then boil, after pouring off the boiling water, you can see that the scale at the bottom of the kettle is automatically removed, this is because the scale is alkaline, and the acid-base reaction dissolves it.
You can see that the effect of citric acid descaler after use is really amazing, no matter how serious the scale can be removed! Citric acid descaler can not only remove limescale in the bathroom, but also be used to clean showers, floors, water dispensers. Let the citric acid descaler stand for about 10 minutes, and then rinse it with water.
With it, all kinds of glass and mirrors at home are free of water stains and scale, and life is more and more comfortable. For housewives who are busy with housework, citric acid descaler is really useful!
Household citric acid descaler, be sure to look for "food grade"!
Only this citric acid is safe enough. It is used to clean tableware and kitchenware, so that it is more assured.
Now our store is a limited-time event: three bottles are only 69 yuan! Six bottles are only 128 yuan!
If you are interested, click the link below to buy: