Car glass film is a common way to maintain cars, which can effectively protect the privacy of passengers in the car, block sunlight and ultraviolet rays, and reduce the temperature in the car. Here are some detailed steps on how to apply car glass film:
1. Preparations.
Before applying the film, you need to prepare the required tools and materials, including the film, scraper, watering can, utility knife, baking gun, etc. At the same time, it is necessary to clean the car glass to ensure that there is no dust and dirt, otherwise it will affect the effect of the film.
2. Choose the right location.
When applying the film, choose a flat place, which can be indoor or outdoor. If you choose to go outdoors, you need to ensure that there is no wind and dust to avoid affecting the quality of the film. At the same time, choose a suitable position for subsequent scraping and drying.
3. Unfold the membrane.
Before unfolding the membrane, it is necessary to check the integrity and quality of the membrane to ensure that there are no defects and breakages. Then, the membrane is unfolded and fixed to the glass, and air bubbles and excess moisture between the membrane and the glass are scraped flat using a scraper.
Fourth, bake the dry film.
After the membrane is fixed to the glass, the membrane needs to be dried using a baking gun so that it fits tightly to the glass. During the drying process, constantly adjust the temperature and distance of the grill to avoid wrinkles or bubbles in the film.
5. Trim the film.
After the membrane has dried, the excess membrane needs to be removed using a utility knife to bring the membrane in line with the glass edge. During the pruning process, be careful not to scratch the glass or cut your fingers.
6. Clean the inside of the car.
After the film is applied, the interior of the car needs to be thoroughly cleaned so that it can be used. It can be cleaned using a professional car cleaner or soapy water.
Through the above steps, you can complete the process of automotive glass film. When applying the film, you need to pay attention to the following:
When choosing a film, it is necessary to choose a product with a good brand reputation to avoid using inferior film that affects driving safety.
Before applying the film, make sure that the car has been cleaned, otherwise it will affect the effect and service life of the film.
When unfolding the membrane, it is important to unfold slowly to avoid wrinkles or creases.
When drying the film, adjust the temperature and distance of the oven to avoid wrinkles or bubbles.
When trimming the film, use a professional utility knife or scraper to avoid scratching the glass or cutting your fingers.
When cleaning the interior of your car, use a professional car cleaner or soapy water for cleaning.
In conclusion, car glass film is a common maintenance method, which can effectively protect the privacy and safety of passengers in the car. When applying the film, you need to pay attention to details and skills to ensure the quality and longevity of the film.