In modern commercial buildings, hotels, airports and other public places, it has become common to choose to install revolving doors and automatic doors in the door area. Not only do they provide easy access, but they also enhance the aesthetics and functionality of the building. However, the installation of these door types has strict requirements for the floor, because the quality of the ground is directly related to the stability, safety and service life of the door type. This article will detail the requirements for the floor when installing these door types.
1. Ground flatness.
Ground flatness is the basic requirement for the installation of revolving doors, automatic doors and other door types. The ground must be level, free of significant height differences and unevenness. This is because the door type needs to rotate or slide smoothly during operation, and if the ground is uneven, it will cause the door type to run unsmoothly or even fail. Therefore, before installation, the ground must be professionally leveled to ensure that the ground flatness meets the requirements. It should be checked and ensured that the levelness of the ground is within the allowable tolerance, usually the levelness tolerance of the ground should not exceed 2mm.
Second, the strength of the ground.
Ground strength is also an important consideration for the installation of these door types. The door type will exert a certain pressure on the ground during operation, especially the revolving door itself has a certain weight. Therefore, the ground must have sufficient bearing capacity to ensure that the door type runs stably and will not sink or deform. Usually, the strength of the ground is required to reach a certain concrete grade or stone thickness, and the specific value should be determined according to the weight of the door type and the frequency of use.
3. Ground slip resistance.
For revolving doors, automatic doors and other door types, the anti-slip performance of the ground is equally important. In the process of personnel passage, if the ground is slippery or there is oil pollution, it is easy to cause personnel to slip or fall, resulting in safety accidents. Therefore, the floor material should have good anti-slip performance, especially in a slippery environment, and still maintain a stable anti-slip effect. At the same time, the floor should also be easy to clean to reduce the accumulation of oil and stains. Aluminum alloy floor mats can be laid to prevent slipping.
Fourth, the ground wear resistance.
The door will rub against the ground during operation, which may cause the ground to wear and tear in the long run. Therefore, the floor material should have good wear resistance and be able to withstand long-term use and various frictions. For high-frequency door types such as revolving doors and automatic doors, the requirements for floor wear resistance are higher. When choosing the floor material, its wear resistance should be fully considered to ensure that the ground can remain flat and smooth for a long time and prolong the service life of the door type.
5. Power supply configuration and drainage design
The reasonable layout of the power supply line should be considered during the ground construction of revolving doors and automatic doors, and the necessary power sockets should be reserved to facilitate the power of the door body. The ground design should have a certain drainage slope to avoid affecting the normal use or life of the door body due to rainwater accumulation.
6. Boundary processing and transition:
Apply appropriate boundary treatment between revolving and automatic doors and the surrounding ground to ensure smooth transitions and reduce the risk of pedestrian tripping. The boundary material selected should be in harmony with the revolving door, automatic door and the overall environment to maintain the consistency and aesthetics of the overall design.
7. Ground material and color.
In addition to the requirements mentioned above, the material and color of the floor are also factors to consider when installing revolving doors, automatic doors, and other door types. The floor material should be in harmony with the door shape to enhance the overall aesthetics. At the same time, the color of the ground should also match the door type, building appearance, etc., to create a harmonious and unified visual effect.