The correct way to tie the hook is very important for fishing, it ensures that the hook does not fall off during the fishing process and also increases the success rate of the fishing. Here's a common and effective way to tie a hook – the improved clinch knot – for most fishing situations:
Threading: Thread the line through the hook hole (or connecting ring) to leave enough tail line (about 15-30 cm).
Wrap: Wrap the tail line back on the main line, about 5 to 7 turns. For thinner threads, you can wrap them a few more times; For thicker threads, you can wrap them a few times less.
Loopback: Thread the end of the tail line through the small loop formed next to the hook eye.
Re-penetration: Thread the end of the tail wire through the large loop formed in step 3 (i.e., the loop formed below the part just wound).
Wetting and tightening: Before tightening the knot, you can gently moisten the thread with your mouth, which will reduce friction and protect the thread from damage. Then, slowly tighten the main and tail lines until the knot fits snugly into the fishhook eye.
Trim the tail line: Use scissors or pliers to trim off the excess tail line, leaving about 3 mm in length.
This method is simple, robust, and suitable for a variety of fishing environments. Of course, there are many other ways to tie the hook, such as the Palamar Knot, Double Clinch Knot, etc., depending on your specific fishing needs and personal preferences.