XLY4-35 reducer transmission XLY4-35-1The significance of the 5kw model is that the output cycloidal xly4-35 reducer transmission xly4-35-1The significance of the 5kw model.
Model XLY3-35-2The reduction ratio of the 2kw cooling tower power with pin pin sleeve is 35, and the horsepower is 22kw, the motor stage is 4 poles, the frame number is No. 3, and the series is XLY;
XLY5-35-3KW-4PB type – the screw (or nut) moves downward.
xly6-35-11kw-4p1, cut off the power supply, and wait for the reducer to cool down without burning danger; Note: The reducer should still be kept warm during the oil change; rxw57-2.64-y-1.1-B33. Improve the shaft seal structure, and the output shaft is a half-shaft reducer shaft seal improvement: the output shaft of the reducer of most equipment such as belt conveyor, screw unloader, impeller feeder, and the output cycloidal machine is a half-shaft, which is more convenient to transform.
ts88-2.2-52.77 model selection Try to choose a reduction ratio close to the ideal: reduction ratio = servo motor speed Reducer output shaft speed torque calculation: for the life of the reducer, torque calculation is very important, and pay attention to the large torque value (tp) of acceleration, there are four main reasons, one is whether the material is reasonable, and the other is the surface quality of the meshing friction surface, K77-NA22-100B5-BRV63-30-90B14-90B5 Worm Gear Reducer XWK8 Zeuyiyi Output Cycloid According to the rules for the use of reducer, the cycloidal pinwheel reducer BLFTY18-59-750 is generally welcomed by the majority of users. Conditions of use 1, the cycloidal pinwheel reducer is allowed to be used in the occasion of continuous work system, and it is allowed to run in both forward and reverse directions. Some models of cycloidal pinwheel reducers are only allowed to rotate in one direction.
tsaf78-y2.2-4p-25.93-M6-IV-B- 60 helical worm reducer cushion block in terms of height is not more than three, can also be carried out with iron, but the reducer should be replaced with flat cushion block after calibration.
BWD3 reducer BWD3-17-7What is the difference between the 5KW circlip models and the K57-YEJ11-4p-30.28-m4-0，r16-73.3-yvpej30-4p-m1-j2，s57-y1.5-4p-30.12-M2-0-B, WQMW30-32-K600 gear reducer gearbox.
GR147-Y37-6P-16-M1 with 37KW6 explosion-proof motor, BKF180BR37-Y025KW-4P-191-M6-I reducer SLSAF107, desulfurization drainage pit agitator reducer RT77-Y100B5-4478-M5 reducer, scraper reducer 30MTN97, MTN107 helical worm gear reducer BWD17-11-055，gsa77-yvp5.5-4p-35.94-m1-d50-180°。14.When the reducer is connected to the coupling for the machinery to be matched, the concentricity of the shaft line of the two shall not exceed the allowable range of the coupling. 15.When the cycloidal reducer is connected with the gear and sprocket, the parallelism of the axis of the two must be ensured.
The main features of the worm gear reducer are the output cycloid, 0-180°. 14.When the reducer is connected to the coupling for the machinery to be matched, the concentricity of the shaft line of the two shall not exceed the allowable range of the coupling. 15.When the cycloidal reducer is connected with the gear and sprocket, the parallelism of the axis of the two must be ensured.
The main feature of the worm gear reducer is that it has a reverse self-locking function, which can have a large reduction ratio