There are three keys to self built houses in rural areas, one trick is less, and good luck will come

Mondo Three rural Updated on 2024-02-07

There are three keys to self-built houses in rural areas, one trick is less, and good luck will come naturally

The three key points in the construction of the rural areas themselves are one step closer to the great era.

Building a house in a rural area is a complex and important task, but many people may overlook some basic issues when building a house. Here, I have summarized three key points for rural self-built houses, hoping to provide you with some reference and inspiration.

1.The importance of the waterproofing layer of the foundation.

In rural self-built houses, foundation waterproofing is a very important part. If you don't do a good job of moisture-proof foundation, the house will be prone to dampness, mold and other problems in the process of long-term use, which will seriously affect life and health. Therefore, it is necessary to place a moisture-proof layer between the foundation and the soil during construction, and waterproof materials or moisture-proof bricks can be used to isolate the penetration of groundwater vapor.

It is also important to note that rural self-built homes tend to be located on lower ground, where humid conditions can be worse than in cities. Therefore, try to choose a place to build a house on higher ground and avoid low-lying areas, which will help solve the problem of damp houses.

2.Choose the right finishing material for the façade.

In the process of building self-built houses in rural areas, it is very important to choose the right exterior wall decoration materials. Based on the current situation, I recommend using real stone paint or water-in-sand as exterior decoration materials instead of tiles or marble.

Compared with ceramic tiles and marble, real stone paint and water-in-sand have better adhesion and are not easy to fall off. In rural areas where the wind and rain are relatively large, the use of real stone paint or sand in water can not only maintain a good appearance, but also reduce safety risks.

In addition, durability must also be considered when choosing exterior wall finishing materials. Choosing materials from high-quality brands and professional construction teams can guarantee the quality and longevity of exterior wall decoration.

3.Control the number of floor-to-ceiling windows.

Floor-to-ceiling windows are one of many people's favorite design elements, bringing more light and view to a room. However, too many floor-to-ceiling windows can lead to poor indoor insulation. Therefore, in the design and construction process, it is necessary to choose the correct number of floor-to-ceiling windows according to the actual needs and avoid overuse.

In addition, it is also important to consider thermal insulation properties when choosing a window material. Window materials with better thermal insulation, such as insulating glass or double glazing, can improve indoor insulation and reduce energy waste.

In short, there are many issues that need to be paid attention to in rural self-built houses, but the number of foundation waterproofing, exterior wall decoration and floor-to-ceiling windows is the most important. Only by doing a good job in these aspects can we truly ensure the quality and comfort of self-built houses in rural areas.

The importance of waterproofing foundations.

The first task in the construction of a rural self-built house is to deal with the waterproofing layer of the foundation. Since most of the rural areas are low-lying and the groundwater table is high, the foundations of self-built houses are easily infiltrated by groundwater. If the waterproofing treatment of the foundation is neglected during the construction process, the long-term use of the house will cause problems such as damp background and mold, which will seriously affect the health of the occupants. Therefore, during the construction process, a moisture-proof layer should be set between the foundation and the ground, and waterproof materials or moisture-proof tiles should be used to isolate the penetration of groundwater vapor. In addition, the damp situation in the countryside may be more severe than in the city, so it is necessary to choose sloping ground for construction as much as possible and avoid low-lying areas, which is conducive to the moisture protection of the house.

Choose the right exterior finishing material.

The second key point in the construction of self-built houses in rural areas is the selection of exterior wall decoration materials. When choosing exterior wall decoration materials, the author recommends using real stone paint or water-in-sand as exterior wall decoration materials, rather than ceramic tiles or marble. Compared with ceramic tiles and marble, real stone paint and water-in-sand have better adhesion, are not easy to fall off, can better resist strong winds and rains in rural areas, maintain a better appearance, and also reduce potential safety hazards. In addition, in order to ensure the quality and service life of the decoration, it is also very important to choose high-quality brand materials and a professional construction team.

Control the number of floor-to-ceiling windows.

The third focus in the construction of rural self-built houses is to control the number of floor-to-ceiling windows. Floor-to-ceiling windows are a design element that can bring good lighting and views to the interior. However, too many floor-to-ceiling windows can lead to poor insulation in the house. Therefore, in the design and construction process, an appropriate number of floor-to-ceiling windows should be selected according to the actual needs to avoid excessive use. In addition, when choosing a window material, its thermal insulation properties should also be considered. Window materials with good thermal insulation properties, such as insulating glass or double glazing, can improve the insulation effect of the room and reduce energy waste.

Summary. Building your own house in the countryside is a complex and difficult task. During the construction process, there were three key points that required special attention: treating the foundation waterproofing, choosing the right façade finishing material, and controlling the number of floor-to-ceiling windows. Only by doing a good job in these tasks can we truly ensure the quality and comfort of self-built houses in rural areas.

The treatment of foundation waterproof layer is an important link that cannot be ignored in rural self-built houses. The low terrain in rural areas and the high groundwater level make it easy for houses to get damp if they are not treated with moisture, which can cause a series of problems such as dampness and mildew on the walls. Therefore, in the process of building a house, it is necessary to create a moisture barrier between the foundation and the ground, and waterproof materials can be used to isolate groundwater vapor. It is also important to note that rural areas can be wetter than urban areas, so choosing a place to build on higher ground can effectively improve waterproofing.

The choice of exterior wall decoration materials is directly related to the appearance and safety of rural self-built houses. In this session, I recommend using real stone paint or sand in water instead of tiles or marble. Compared with ceramic tiles and marble, real stone paint and water-in-sand have better adhesion and are not easy to fall off. Especially in windy areas such as rural areas, choosing real stone paint or sand in water can guarantee the beauty and safety of the house. Of course, when choosing decorative materials, we should also consider the brand and quality of the construction team to ensure the durability and service life of the decorative effect.

For friends who like floor-to-ceiling windows, the author would like to remind everyone that too many floor-to-ceiling windows will affect the thermal insulation effect of the house. Therefore, in the design and construction process, the number of floor-to-ceiling windows should be reasonably controlled according to actual needs. This not only ensures the benefits of indoor lighting and visibility, but also avoids the problem of energy waste caused by too many floor-to-ceiling windows. In addition, choosing materials with good thermal insulation properties, such as insulating glass or double glazing, can also further improve the insulation effect and reduce energy waste.

To sum up, dealing with the foundation waterproof layer, choosing the right exterior wall decoration materials, and controlling the number of floor-to-ceiling windows are the three key points of rural self-built houses. As long as these problems are properly handled, the quality and living comfort of self-built houses can be guaranteed. I hope these tips can provide reference and help for friends who are building a house.

Related Pages