In industrial production, the crushing of materials is a common process, which is directly related to the quality of the product and the efficiency of subsequent processing. As a commonly used crushing equipment, roller crusher is widely used in the medium and fine crushing operation of various materials due to its simple structure, convenient maintenance and uniform particle size. In this article, we will analyze the effect of 5 mm sand head material crushed to less than 2 mm using a roller crusher.
For the crushing of 5 mm sand head material, the following effects can be obtained by using a roller crusher:
1.Large crushing ratio: The crushing ratio of the roller crusher is very large, which can crush 5 mm sand head material into fine material below 2 mm to meet various needs.
2.Uniform particle size: The particle size of the roller crusher is uniform, which meets the standard requirements and can ensure the purity of the material.
3.High output: The roller crusher has a high output, which can quickly crush a large number of materials and improve production efficiency.
4.Easy to operate: The roller crusher is simple and convenient to operate, easy to maintain and maintain, and can also reduce labor costs.
5.Energy saving and environmental protection: The roller crusher adopts advanced transmission system and sealing design, which can reduce noise and vibration, reduce the impact on the surrounding environment, and also save energy and resources.
The working principle of the roller crusher is to use two rollers rotating in opposite directions to crush the material, and the discharge particle size can be controlled by adjusting the distance between the two rollers. When the 5 mm sand head material enters the roller crusher, it is crushed into fine material below 2 mm after multiple extrusions and friction of the two rollers. Because the 5 mm sand head material is crushed to less than 2 mm with a roller crusher, the effect is good, so it has been widely used. The roller crusher has the advantages of strong crushing capacity, large processing capacity, easy operation, energy saving and environmental protection, and is suitable for crushing and sand making of various ores and rocks.
In practical application, the following aspects need to be paid attention to when using the roller crusher:
1.Adjust the roller spacing: according to the nature of the material and the particle size requirements, adjust the roller spacing reasonably to ensure a better crushing effect.
2.Control the feed speed: The control of the feed speed has an important impact on the crushing effect and output of the roll crusher, and needs to be adjusted according to the actual situation.
3.Keep the equipment clean: clean up the impurities and deposits inside the equipment in time to ensure the normal operation of the equipment and prolong the service life.