The Art Journey of PPR Pipe Installation: From a novice to an expert, PPR pipe installation may be a difficult problem for novices. But as long as you take it step by step, you can also turn into a pipe installation expert with zero foundation. Next, let's start this artistic journey together!
Preparation: Before you set off, draw a blueprint and define where each component will end. Prepare the required tools such as pipes, fittings, hot melters, pipe shears, box rulers, etc. Make sure the construction site is clean and dusty, so that clutter doesn't disrupt your pace.
Skillful hand cutting: Use a special PPR pipe cutter to cut the pipe into a regular length to ensure that the cut is smooth and thorny, paving the way for subsequent connection work.
Strict quality inspection: Before splicing, every inch of pipe and every pipe fitting is carefully inspected to ensure that they are intact and free of defects. At the same time, make sure that the pipe ports are flat and free of impurities.
Hot melt installation: Put the pipe fittings into the hot melt machine together with the pipe and heat it to the specified temperature. They are quickly spliced together, aligned, fitted, and once cooled, a perfect connection is born.
Steady as a mountain: To prevent the pipe from shaking or sagging, we need to hold it in place with a special pipe clamp or hanger. Make sure the entire pipeline is rock solid.
Pressure test test: After the installation is completed, inject the water of life into the pipeline to test its sealing performance. If there is leakage, repair it in time.
Perfect finish: clean up the site and sort out the remaining pipes and fittings. Ensure that everything is done in accordance with safety norms and relevant standards.
By following these seven steps, even if you are a beginner, you will be able to navigate the installation of PPR pipes with ease.