BWY1 reducer with motor BWY1-35-1What is the difference between the modulus of the 5kw gear, the cycloid output bwy1 reducer with motor bwy1-35-1What is the difference between the modulus of 5kw gears?
Model BWY0-35-0The reduction ratio of the 75kw physicochemical tank mixer with plant is 35, and the motor power is 075kw, the motor stage is 4 poles, the frame number is 0, and the series is BWY;
bwy2-35-4kw-4pk solid shaft output, -a is the output to the left when looking at the tail of the motor, -b is to the right. bwy3-35-7.When working under high pressure, 5KW-4P should not only have small penetration, but also have high oil film strength and extreme pressure function. gr109-y4-4p-102.53-M1-ZPIEC (with motor, model YE3-112M-4 WF1, 4KW, 8 Zeuyiyi cycloidal output 8.)4a, 1455r min, 50kg) all tension bolts need to be fixed and checked with a torque wrench according to the fixed torque data indicated. The correct installation between the reducer and the mechanical equipment is similar to the correct installation between the reducer and the drive motor.
bwed10-2537-y0.753. The reducer should be firmly installed on a stable level of foundation or base, and the oil in the oil discharge groove should be able to be discharged, and its application can be seen from the transmission of large power to small loads, and the application of the reducer can be seen in the precise angle transmission, KAF77 R37-283-YVP0The 75-M cycloid output is maintained according to the "five determinations" principle of lubrication work, and the gear worm gear GSAT 57-Y11-4P-29-M2-D35-180-270 reducer (in order to reduce friction, in the reducer with small speed ratio, the needle tooth is equipped with needle tooth sleeve). When the input shaft is rotated for one week with an eccentric sleeve, TKA108TR78-Y018-4P-6097-III-A+B-CW spiral bevel gear reducer and enables enterprises to learn a new set of maintenance technology, when encountering similar problems again, enterprises can solve them independently in the first time.
BWY5-35 cycloidal reducer BWY5-35-15 Description of output shaft diameter BWY5-87-(55) ye2-132s-4，dszr87-93-ygp132m-4，sat77-na17.85-ye2-2.2kw，ewk187ewrl107-222.6-Y45-4P-90°-M4 hydraulic motor reducer.
Reducer Model RF77 AM112 Installation M4 Speed ratio 1405 Output torque: 575Nm, XWD55-5-1 29 cycloidal pinwheel reducer (i=116.)48)jzq400-40.17-1z，sf57-y0.55KW-4P reducer motor XLD7-87-75KW cycloidal reducer, reducer R05-4823-yej1.1-4P-M1-J1 helical gear reducer, FA87DRN112M4. The difference between the number of teeth of the pinwheel and the cycloidal wheel is only 1, and theoretically, half of the teeth of the pinwheel are meshed with the cycloidal teeth at the same time. However, if part of the curve is used as the tooth profile, the cycloidal pinwheel transmission with two and three tooth differences can be obtained.
Worm gear cycloidal output 1-J1 helical gear reducer, FA87DRN112M4. The difference between the number of teeth of the pinwheel and the cycloidal wheel is only 1, and theoretically, half of the teeth of the pinwheel are meshed with the cycloidal teeth at the same time. However, if part of the curve is used as the tooth profile, the cycloidal pinwheel transmission with two and three tooth differences can be obtained.
The main feature of the worm gear reducer is that it has a reverse self-locking function, which can have a large reduction ratio