Some people are very afraid of outside noise, so what if the windows are not soundproof? ForwindowsThe phenomenon of non-sound insulation, as well as the material installation of windows, will be introduced by Zhengzhou Decoration Network.
OneWhat should I do if the windows are not soundproofed?
1. Paste the window sound insulation film.
1) The sound insulation film is generally a multi-layer structure, and the sound insulation resin is sandwiched between the polyvinyl butyral (PVB) layer. In addition, the entire interlayer is evenly distributed, and the particles with a thermal insulation effect (thermal insulation particles) are evenly distributed.
2) In addition, when using sound insulation film in buildings, the high-performance interlayer film sandwiched in the middle of the film has the characteristics of visible light transmission, so it will not block the visible light transmittance of the building and maintain a clear line of sight. Window soundproof film is relatively cheap, and the method used is the same as that of mobile phone film.
2. Install soundproof curtains.
Soundproof curtains are soundproofed by completely closing the windows, and some places such as movie theaters use more soundproof curtains, and the effect is also good.
3. Install the window soundproof seal.
Sound insulation seals are only effective for poorly sealed windows, and they are also very cheap, but it is necessary to determine whether the lack of sound insulation is caused by the large gap in the window, otherwise it is useless to paste it. The sealing strip is to plug the gap in the window, which has the same effect as the soundproof cotton.
4. Add a layer of soundproof windows.
1) Soundproof windows are generally composed of double or triple layers of glass of the same texture or glass of different thicknesses and window frames, and the glass used will be thicker than ordinary window glass. Some soundproof windows are made of specially processed acoustic insulation layers, or glass components made of aluminum alloy partitions filled with desiccant sandwiched between the acoustic insulation layers, and the edges are bonded with sealant.
2) Some use the principle of thermos flask to make transparent and light-free balanced compression-resistant flat glass components, fill the window frame with sound-absorbing materials, and can fully absorb the sound waves of transparent glass, and can isolate the noise of each frequency band to the greatest extent.
IIWhat are the window materials?
Window material type 1, plastic steel window.
The raw material of plastic steel windows is to take rigid strength of anti-oxidation plastic, because the aluminum-plastic material does not conduct heat, so the thermal insulation of plastic steel windows is better, and the interior is supported by steel, so the overall frame will not be deformed, then for the wind in the north is relatively strong, plastic steel windows have become the first choice, plastic steel windows are not easy to age, but also strong, but also to ensure the temperature and utilization rate of the balcony.
Window material type 2, aluminum alloy window.
Aluminum alloy windows are more common in family life, aluminum alloy windows are relatively strong, have the characteristics of no aging and rust, and the advantages of impact resistance and high strength are also favored by many buyers, so there are more aluminum alloy windows on the market, but aluminum alloy windows also have shortcomings, because they are metallic and have good thermal conductivity, so they can quickly transfer the outside heat into the house in summer, resulting in cold winter and hot summer.
Window material type 3, broken bridge aluminum window.
Because the thermal conductivity of aluminum alloy windows is relatively good, it can transfer heat into the house, in order to change this performance. And after continuous research and development, the use of "broken bridge" technology on aluminum alloy windows, this deficiency has been improved a lot, broken bridge aluminum is to add a layer of resin material to the original aluminum alloy, so that it will not transfer the heat from the outside, which is the "broken bridge" window.