Fixing method of FRP fanFRP fan is a common industrial fan, which has a wide range of applications in industrial production.
When using FRP fans, the first problem is how to properly fix it to the wall to ensure its safe and reliable operation.
The following will focus on the common FRP fan fixing methods, and give an in-depth analysis of their principles and operations.
1. Wall embedding method This is one of the most commonly used fixing methods.
Before the construction of the wall, the construction party will pre-embed the fixed plate or fix the steel bar in the wall in advance.
After the wall is completed, the support frame of the FRP fan is connected with the fixed plate or fixed steel bar embedded in the wall, and fixed with bolts to ensure the stability of the fan.
Second, the flange connection method In some occasions, due to the special working environment of the FRP fan, it cannot be directly connected with the wall, and the flange connection method can be used at this time.
This method requires the installation of a flange between the air outlet of the FRP fan and the air inlet of the wall, and connect it tightly with bolts.
The flange connection method can effectively isolate the vibration and noise of the fan and ensure its normal operation.
3. Bracket fixing method In some cases, there may be no embedded fixing plate or fixed steel bar on the wall, and the flange connection method cannot be used, so the bracket fixing method can be used.
The bracket fixing method is usually by installing the support frame of the FRP fan directly on the wall and fixing it with bolts.
This fixing method is relatively simple, but it is necessary to ensure that the contact between the bracket and the wall is strong to avoid loosening or falling off during long-term use.
There are three common fixing methods for FRP fans: wall embedding method, flange connection method and bracket fixing method.
When carrying out fixation, in addition to choosing the appropriate fixation method, the following points need to be noted:1Ensure the load-bearing capacity of the wall: Before choosing the fixing method, the load-bearing capacity of the wall should be reasonably evaluated to ensure that it can withstand the weight of the FRP fan.
2.Use high-quality fixing materials: Choose the right fastening materials and bolts to ensure that they are of good quality and durable.
3.Ensure that the fixing is firm: when fixing, it is necessary to ensure that the fixing bolt is tightened with appropriate strength, which not only ensures the stability of the fan, but also avoids damage caused by excessive force.
4.Pay attention to shockproof measures: For some special working conditions, certain shockproof measures can be taken, such as installing rubber pads and other cushioning materials between the fan and the wall to reduce vibration and noise.
To sum up, there are many ways to fix FRP fans, and you can choose the appropriate fixing method according to the actual situation.
Either way, make sure that the fixation is secure, stable and reliable to ensure that the fan works at its best.