The components of grease trap equipment usually include the following parts:
Sedimentation tank: It is used to separate oil and water from oily sewage by gravity sedimentation. A sedimentation tank usually consists of a mixing tank, a sedimentation tank, and a clear water tank.
Oil-water separator: used to further separate oil and water in the sedimentation tank. Common oil-water separators include gravity sedimentation separators, cyclone separators, membrane separators, etc.
Sand remover: It is used to precipitate and collect solid particles and suspended solids in sewage, prevent them from entering the sedimentation tank and oil-water separator, and affect the normal operation of grease trap equipment.
Oil sludge treatment unit: used to treat the oil sludge collected in the sedimentation tank and oil-water separator. Common sludge treatment devices include centrifuges, strainers, sludge dryers, etc.
Oil-water monitoring device: used to monitor and control the effect of oil-water separation in real time, including oil-water concentration monitor, oil-water flow meter, etc.
Discharge device: used to discharge the treated water and oil sludge, such as pumps, pipes, valves, etc.
Control system: used for the operation and monitoring of automatic control equipment, including PLC control system, instrument control system, etc.
The above are the common components of general grease trap equipment, and the specific configuration and combination may vary depending on the process requirements and use scenarios.