Insulating Oil Dielectric Strength Tester Instructions for use.
1. Overview. Insulating oil dielectric strength tester is a kind of equipment used to measure the dielectric strength of insulating oil, which is widely used in electric power, petroleum, chemical industry and other fields. By measuring the dielectric strength of the insulating oil, the instrument can help users quickly judge the quality and performance of the insulating oil, so as to ensure the safe operation of power equipment. In order for you to use this instrument better, this article will introduce the instructions for use of the insulating oil dielectric strength tester in detail.
Second, the use of the steps.
1.Preparation.
Before starting the test, make sure you have the following items ready: insulating oil dielectric strength tester, insulating oil, electrodes, power adapter, and operating instructions. Place the instrument on a stable table to ensure that there is no interference from magnetic fields around it.
2.Install the electrodes.
Install the electrodes correctly on the tester according to the instructions in the manual. Please check that the electrodes are intact and replace them in time if they are damaged.
3.Oiling. Open the oil filling port of the insulating oil dielectric strength tester and inject an appropriate amount of insulating oil. Make sure that the oil level height exceeds the electrode, but not the upper edge of the measuring hole.
4.Connect the power supply.
Connect the tester to the power supply using a power adapter and make sure the power supply voltage meets the instrument requirements.
5.Boot. Press the power switch of the insulating oil dielectric strength tester, and the instrument starts to self-test. After the self-test is completed, the instrument enters the standby state.
6.Set the parameters.
Set the test parameters as needed, such as test mode, voltage level, etc. Please note that different models of instruments may have different parameter setting methods, please refer to the instructions of the specific instrument for setting.
7.Start testing.
Press the start button and the insulating oil dielectric strength tester will start the test. During the test, the instrument will automatically boost the pressure and record the test data. At the end of the test, the instrument automatically lowers the pressure and displays the test result.
8.Read the results.
According to the display of the instrument, the dielectric strength value of the insulating oil is read. If multiple measurements are required, steps 6-8 can be repeated.
9.Cleaning and maintenance.
When the test is complete, remove the electrodes and clean them up. Regular maintenance and maintenance of the instrument to ensure its performance and accuracy.
3. Precautions.
1.Please read the operating instructions carefully before use to ensure the correct use of the instrument.
2.Ensure that the supply voltage meets the requirements of the instrument to avoid damage to the instrument or inaccurate measurement results due to too high or too low voltage.
3.During the test, do not touch the electrodes or other parts of the instrument to avoid the risk of electric shock.
4.If you find that the instrument is faulty or the measurement result is abnormal, please contact a professional for maintenance or calibration in time.