Graphite machining center is a kind of equipment widely used in various industrial manufacturing fields, but it is inevitable that there will be failures during use.
This article will introduce the common faults and troubleshooting methods of graphite machining centers, and help readers better diagnose and solve the faults of graphite machining centers.
When the machining accuracy of the graphite machining center decreases, it is first necessary to check whether the tool is worn, the tool is loose or the material is fixed unsteadily. After inspecting the tool, the machine should also be checked for external shocks or shocks. If none of the above problems are abnormal, then it is necessary to further check whether the machining program of the machine is set up correctly and whether adjustments need to be made.
The graphite machining center will produce a certain amount of noise when it is working normally, but if the noise is too loud, it may be caused by wear or damage to the machine parts. At this point, the spindle, guide rails, and transmission system should be checked first. If an abnormality is found, it is necessary to replace or repair the relevant parts in time. In addition, when using graphite machining centers, lubrication and maintenance should be carried out regularly to reduce noise generation.
If the graphite machining center is running unstable, it is necessary to check whether the parts are loose, especially the tool holders, fixtures and workholding systems, to ensure that they are in good working order. In addition, the machine should be checked to see if the temperature is too high and whether cooling or heat transfer work is required.
Through the troubleshooting methods of the above common faults, I believe that readers can better diagnose and solve the faults of graphite processing centers. In actual operation, equipment maintenance and maintenance should also be carried out regularly to avoid the occurrence of failures.
Shangshan Seiki graphite machine