The process of installing a chimney revolving ladder
1. Preparations.
Before installing the chimney revolving ladder, adequate preparation is required. First of all, it is necessary to ensure the safety of the construction site, clean up the debris and dust inside the chimney, and set up the corresponding scaffolding and safety nets. At the same time, it is necessary to prepare the required materials and tools, such as rotating ladders, screws, welding rods, etc., and check whether their quality and quantity meet the requirements.
Pay attention to the direct communication here, 24 hours dedicated to your service.
Second, the basic production.
Make the foundation of the revolving ladder at the base of the chimney. According to the design requirements and actual situation of the chimney, determine the position and size of the foundation, and measure and mark. Then, according to the requirements of the design drawings, the foundation is made using materials such as steel and concrete, ensuring that it is strong, flat, and vertical.
3. Install the rotating ladder bracket.
After the foundation is made, the installation of the bracket for the revolving ladder begins. According to the design requirements, select the appropriate bracket type and material, such as angle steel, channel steel, etc., and process and weld according to the requirements of the design drawings. When installing the bracket, make sure that it is flat, vertical, firm, and reliably connected to the foundation.
4. Fixed rotating ladder.
After the bracket installation is complete, start securing the revolving ladder. According to the design requirements, select the appropriate type and material of the rotary ladder, such as stainless steel, galvanized steel, etc., and process and assemble it according to the requirements of the design drawings. When fixing the rotating ladder, make sure that it is flat, vertical, firm, and securely connected to the bracket. At the same time, pay attention to the spacing and position of the rotating ladder to ensure that it meets the design requirements.
5. Commissioning and acceptance.
After the installation of the rotary ladder is completed, it needs to be commissioned and accepted. Check whether the installation of the rotating ladder meets the design requirements, whether it is firm, flat and vertical, and test whether its rotation function is normal. If a problem is found, adjust and fix it in a timely manner. Finally, carry out the acceptance and fill in the acceptance report to ensure that the quality and safety of the rotary ladder meet the requirements.
In conclusion, the installation of a chimney revolving ladder is a highly technical job that requires a professional to operate. During the installation process, the design requirements and safety specifications should be strictly adhered to to ensure the installation quality and safety of use. At the same time, it is necessary to pay attention to environmental protection and civilized construction, and reduce the impact on the surrounding environment and personnel.