The high-stop and low-starting air booster system is based on the air pressurization system of Taizhou Finnte, equipped with a digital intelligent pressure gauge, which is suitable for the use of some factories when the air source is occasionally insufficient, such as; The demand pressure of factory equipment is 07MPa, the factory air supply occasionally drops to 0Use this in the case of 7MPa, set the upper line pressure to 0.71MPa down-line pressure 069, so that when the gas source is higher than 0At 7 o'clock, the booster pump will not work, which is equivalent to a high-pressure pipeline, and the air booster pump is not consumed at this time. When the pressure is lower than 0At 69MPa, the air booster system will increase the pressure to 0 in time71mpa。Compared with the air booster system, this equipment can effectively save energy and reduce emissions, and at the same time increase the service life of the booster pump.
the high stop low start air boost system is equipped with a digital intelligent pressure gauge by taizhou feint on the basis of the air boost system. this equipment is suitable for use in some factories where the air supply is occasionally insufficient, such as; the required pressure for factory equipment is 0.7mpa, and this product is used when the factory air supply occasionally drops to 0.7mpa. set the upper line pressure to 0.71mpa and the lower line pressure to 0.69. this way, when the air supply exceeds 0.7, the booster pump will not work, which is like a high-pressure pipeline. at this time, the air booster pump is not consumed. when the pressure is below 0.69 mpa, the air pressure boosting system will promptly increase the pressure to 0.71 mpa. compared to the air boosting system, this device has many effective energy-s**ing and emission reduction measures, while also increasing the service life of the booster pump.
High stop and low start air booster system parameters:
high stop low start air boost system parameters:
1；Boost range: 0-4MPa can be set.
1; boosting range: 0-4mpa can be set.
2；Flow range: 360-1800L min.
2; flow range: 360-1800l/min.
3；On-line pressure setting range: 0-4MPa.
3; setting range of online pressure: 0-4mpa.
4；Downline pressure setting range: 0-4MPa.
4; offline pressure setting range: 0-4mpa.
5；Air source inlet pressure: 2-8 bar.
5; air intake pressure: 2-8 bar.
6；Output pressure range: 0-4MPa.
6; output pressure range: 0-4mpa.
7；Air source requirements: clean compressed air.
7; air source requirements: clean compressed air.