The installation method of self-made progressive cavity pump is a commonly used centrifugal pump, which is widely used in industrial production and civil fields.
If you have the need to make your own progressive cavity pump, the following will give you a detailed introduction to the installation method of the progressive cavity pump.
Step 1: Preparation Before installing the progressive cavity pump, you first need to make some preparations.
You need to carefully read the instruction manual of the progressive cavity pump to understand the structure and performance characteristics of the product.
Prepare the necessary tools and installation materials to ensure a smooth installation.
Step 2: Choosing a suitable installation position for the progressive cavity pump usually needs to be installed on a stable level ground to ensure the stable operation of the pump.
It is necessary to ensure that the inlet and outlet of the pump are unobstructed and convenient to connect the pipeline.
When choosing an installation location, also take into account the ease of service and maintenance.
Step 3: Install the foundation seatBefore installing the progressive cavity pump, you need to install the foundation seat.
Place the base in the mounting position and fix it with cement to ensure that the base is stable and reliable.
According to the weight and size of the progressive cavity pump, choose the appropriate base size to provide sufficient support.
Step 4: Install the inlet and outlet pipes Connect the inlet and outlet pipes to the inlet and outlet of the progressive cavity pump.
During the connection process, care should be taken to maintain the tightness of the pipe to ensure that there is no leakage.
Materials such as sealants or rubber gaskets can be used to enhance the seal.
Step 5: Connect the power cord of the progressive cavity pump to the power socket.
During the connection process, pay attention to check whether the connector of the power cord is stable and reliable to avoid loosening or short circuit.
Ensure that the power supply of the power cord is stable and meets the rated voltage requirements of the product.
Step 6: Start the screw pumpAfter completing the above installation steps, you can start to start the screw pump for trial operation.
According to the requirements of the product manual, turn on the power switch and observe the operation of the pump.
If everything is fine, the installation is successful.
It should be noted that when operating the progressive cavity pump, it is necessary to keep the pump clean, check and maintain it regularly and clean up the debris in time.
When not in use for a long time, the power cord should be unplugged, and the progressive cavity pump should be stored in a dry and ventilated place to avoid damage caused by moisture and dust.
To sum up, the installation method of self-made progressive cavity pump mainly includes preparation, selection of suitable location, installation of foundation base, connection of inlet and outlet pipelines, connection of power supply and start of progressive cavity pump and other steps.
With the correct installation and use of progressive cavity pumps, it is possible to ensure their proper operation and service life.
Be sure to follow the instruction manual to provide better pumping results.