No matter what the product is, if you don't have a specific understanding of it, then you may add some unnecessary costs when you use it again. Just as our swimming pool film material is concerned, there are many friends who do not understand, and add unnecessary costs to themselves.
As a new waterproof decorative material for swimming pools, water parks, hot springs and other wading places, swimming pool film is very different from other waterproof materials, and its appearance greatly improves the cost performance of the material itself. Its advantages are obvious, such as soft texture, PVC environmentally friendly material, antibacterial and staining, low temperature resistance, high temperature resistance, ultraviolet resistance, etc., so that the swimming pool film indoor and outdoor pool projects can be installed and used. In addition, the service life of the swimming pool film is also long, and the swimming pool of the general ceramic tile and waterproof coating type needs to be replaced after 2-3 years, and the swimming pool film can be used for ten years.
Why don't you know about the pool film, you may increase some of the cost? There are two reasons for this:
1. For example, if you don't know about the swimming pool film, some friends may directly do a layer of waterproof and then paste the film, which will cause unnecessary costs. In fact, the choice of swimming pool film, after the concrete is poured, there is no need to do waterproofing, and there is no need to paste pool tiles, and the foundation surface is leveled to achieve the conditions of flatness, dryness and sand-free, and then the swimming pool film is paved, and the water can be injected after the paving is completed. This is the misunderstanding that many friends are prone to after choosing a swimming pool film, which is also different from other swimming pool waterproof materials, so if you choose a swimming pool film, you don't need to do waterproof treatment again.
Second, for the old renovation type of swimming pool, such as the tile type swimming pool, some friends directly remove the original tiles, and then pave the pool film. As everyone knows, the pool film can also be paved directly on the tile surface. Of course, not all tiles can be paved directly, and it also depends on the degree of damage to the old tiles. If the old pool tiles fall off and damage in a large area, it needs to be shoveled off and then the cement mortar is leveled, and finally the pool film is paved. As long as the pool tiles are only partially damaged, then we don't need to shovel them all, only need to do local tile shoveling and leveling treatment. This treatment not only solves the problem of old ceramic tile transformation, but also controls the cost. Pool film