The Liugong 50 loader is installed with a fully automatic mixer bucket all in one machine

The Liugong 50 loader is installed with a fully automatic mixer bucket all-in-one machine

The Liugong 50 loader is a heavy-duty loader that is mainly used for shoveling, transporting and unloading various materials. The automatic mixer bucket is a kind of equipment that combines the mixer bucket with the loader, which can mix while the loader shovels the material.

The installation steps can be referred to as follows:

1.Preparation: Make sure that there is enough space at the installation site to facilitate the installation and operation of the mixing bucket. At the same time, make sure that there is enough power supply at the installation site to support the operation of the mixing bucket. Be prepared with the tools and equipment needed for installation, such as wrenches, screwdrivers, etc.

2.Installing the agitator: To install the agitator on the bucket of the Liugong 50 loader, you need to use a suitable wrench to tighten or loosen the bolts and nuts to ensure that the agitator is fixed in the proper position.

3.Adjust the hydraulic system: Adjust the hydraulic system of the loader to ensure that the lifting and shoveling actions of the mixer bucket can be coordinated with the actions of the loader. This may require some changes and adjustments to the hydraulic system.

4.Connect the control circuit: connect the control circuit of the mixing bucket to the control system of the loader to ensure that the mixing bucket can be controlled synchronously with the loader.

5.Testing and commissioning: After the installation is completed, testing and debugging are required to ensure that the mixer bucket can work properly and coordinate with the action of the loader.