Through the communication with many users in the past few days, many friends have asked about the topic of dry goods sharing: precautions for the use of grinding fluid, and this article will introduce the places that everyone is more concerned about.
Grinding fluid is a liquid cooling and lubricating medium used in metalworking. Correct use of grinding fluids can improve machining quality and efficiency, as well as extend tool life. The following are the precautions for the use of grinding fluids, which are introduced in depth from many aspects.
1. Choose the right grinding fluid: choose the appropriate grinding fluid according to different processing materials and processing methods. Common grinding fluids are water-soluble grinding fluids, solvent-based grinding fluids, and lubricating oils.
2.Use grinding fluid in moderation: Too much or too little grinding fluid can have a negative impact on machining results. Too much will cause waste and environmental pollution, too little will lead to overheating of the tool during the machining process, affecting the quality of machining.
3.Keep the grinding fluid clean: The grinding fluid will be affected by contaminants such as cutting chips and oil stains during use, so it is necessary to clean the grinding fluid sedimentation tank and filter regularly to keep the grinding fluid clean to improve the lubrication effect.
4.Control the concentration of grinding fluid: too high a concentration of grinding fluid will increase costs, and too low a concentration will reduce lubrication and cooling effectiveness. The concentration of the grinding fluid should be carefully adjusted before use, and it should be regularly tested and replenished.
5.Pay attention to the pH of the grinding fluid: A low or high pH of the grinding fluid can have a negative effect on machining. A low pH can lead to corrosion, while a high pH can lead to foam. Regularly check and adjust the pH value of the grinding fluid to keep it within the appropriate range.
6.Avoid contamination of grinding fluids: Do not mix different types of metalworking fluids to avoid chemical reactions. At the same time, contact with impurities such as moisture and dust should be avoided to prevent contamination of grinding fluid.
7.Keep the machining environment well ventilated: Grinding fluids will release odors and harmful gases during processing, and it is necessary to maintain a good ventilation environment to avoid harm to workers' health.
8.Comply with safe operating procedures: When using grinding fluid, wear labor protection equipment, such as gloves and goggles, correctly according to the operating procedures. Avoid spilling the fluid in the eyes, inhaling it into the respiratory tract, or contacting** to ensure personal safety.
Proper use of grinding fluids is essential to improve machining efficiency and quality. Choosing the right grinding fluid, using it in the right amount, keeping it clean, controlling the concentration and pH value, avoiding contamination, maintaining good ventilation, and following safe operating procedures are all aspects that need to be taken into account when working with grinding fluids.