Hanyang public toilet partition installation steps
1. Measure the size.
First of all, the size of the toilet partition needs to be accurately measured. This includes the length, width, and height of the partition. Make sure that the measurement results are accurate, as this will affect the subsequent installation process.
2. Prepare materials.
According to the measured dimensions, prepare the corresponding materials. This includes partition panels, connectors, screws, etc. Ensure that the quality of all materials is up to standard and the quantity is sufficient.
3. Install the ground.
Before installing the partition, the floor needs to be installed. The floor should be flat and sturdy enough to withstand the weight of the partition. If the ground does not meet the requirements, it needs to be reinforced.
Fourth, assemble the partition.
Assemble the partition panels and connectors according to the design drawings. Pay attention to the degree of tightness of the screws, not only to ensure the stability of the structure, but also to avoid overtightening and causing the plate to crack.
5. Install the door leaf.
The installation of the door leaf is a key step in the installation of the partition. Make sure that the door leaf opens and closes smoothly without jamming. At the same time, it is necessary to ensure that the sealing between the door leaf and the partition is good.
6. Adjust the position.
During the installation process, the position of the partition needs to be constantly adjusted to ensure that the position and angle of the partition meet the design requirements. At the same time, it is also necessary to ensure the stability of the partition.
7. Cleaning and maintenance.
Once the installation is complete, cleaning and maintenance are required. Wipe the surface of the partition with a damp cloth to remove dust and stains. At the same time, regularly check the tightness of the screws and adjust them in time if necessary.
The above are the steps to install the partition of a public toilet in Hanyang. During the installation process, it is necessary to pay attention to safety to avoid accidents caused by improper operation. At the same time, it is also necessary to ensure the quality of installation and ensure that the partition is used well.