With its lightweight, breathable and fashionable design, Xtep mesh shoes are deeply loved by the majority of sports enthusiasts. However, due to the special material, mesh shoes need special attention in cleaning and maintenance. Below, we will introduce the cleaning method of Xtep mesh shoes in detail to help you easily solve the problem of dirty shoes.
1. Preparation before cleaning.
Check the upper material: The material of Xtep mesh shoes is mostly synthetic fibers, such as nylon, polyester fiber, etc. Before washing, make sure you know the specific material of the upper so that you can choose the right cleaning method.
Prepare cleaning tools: When cleaning Xtep mesh shoes, you will need to prepare the following tools: a soft brush, mild detergent, water, a clean towel or paper towel, shoe braces, or newspaper (to keep the shoe in shape).
Second, the cleaning steps.
Remove surface dust: Use a soft-bristled brush to gently brush off dust and debris from the upper. Be careful not to use too much force to avoid damaging the upper fibers.
Soak and wash: Pour neutral detergent into clean water and stir well. Then soak the Xtep mesh shoes in warm water for about 5-10 minutes. Once the upper is fully wet, gently scrub the upper with a soft-bristled brush to remove stains.
Wash the soles and heels: Use a soft brush to apply an appropriate amount of neutral detergent and brush the soles and heels. These areas are prone to accumulation of sediment and dirt and need to be cleaned intensively.
Rinse & Deodorize: Rinse the upper with clean water to make sure the detergent is completely washed off. At the same time, you can use a clean towel or paper towel to absorb excess water. If your shoes have an odor, you can place some activated charcoal or desiccant inside the shoes to help remove the odor.
3. Maintenance after cleaning.
Natural drying: Place Xtep mesh shoes in a ventilated place to dry naturally, away from direct sunlight. Do not use hot air to dry to avoid damaging the upper material.
Keep your shoes in shape: You can use shoe supports or newspapers to tuck into your shoes while they're drying. This not only prevents the shoe from deforming, but also prolongs the life of the shoe.
Regular cleaning: In order to maintain the aesthetics and performance of Xtep mesh shoes, regular cleaning is recommended. In daily use, care should also be taken to avoid contact with sharp objects to avoid scratching the upper.
4. Precautions.
Avoid using bleach: When washing Xtep mesh shoes, never use bleach or detergents that contain bleaching ingredients. These chemicals can damage the upper fibers, causing the upper to turn yellow or deteriorate.
Use hot water sparingly: While hot water can help remove stains, too high a temperature may deform or fade the upper material. Therefore, when washing Xtep mesh shoes, use lukewarm water instead of hot water.
Gentle handling: Due to the fragile material of mesh shoes, gentle handling is required during the cleaning process. Avoid pulling or twisting the upper too hard to avoid damage.
Avoid prolonged soaking: While soaking can help soften stains, prolonged soaking may cause the upper material to absorb water and swell, causing it to deform. Therefore, it is recommended to control the soaking time of Xtep mesh shoes within 10 minutes.
Proper cleaning and maintenance practices are essential to maintain the aesthetics and performance of Xtep mesh shoes. By following the above recommendations, you will be able to easily deal with the dirtiness of Xtep mesh shoes while extending the life of your shoes.