Carbon fiber compression molding is the early stage of the need for accurate temperature to form, the need for stage temperature control, such as the early stage of the first temperature to 100 degrees for a period of time, and then the temperature to 150 degrees for 1 hour, the later cooling cooling molding to take out the product. The following is an introduction to the advantages of carbon fiber molded oil heaters.
The carbon fiber molded oil heater can be artificially programmed with process parameters up to 64 segments. It can be mainly divided into 4 process formula parameters, each of which has 16 segments. Easy control and choice. When the process parameters are set, the system will carry out precise temperature control in strict accordance with the set requirements, so that customers can fully experience industrial automation 40 of the conveniences given.
The carbon fiber molded oil heater can realize the switching control of hot and cold oil, when the customer needs to heat the switch to the heating circulation system, the hot oil will enter the mold for temperature control; When the customer needs to cool down, switch to the cooling circulation system, and the cold oil will enter the mold for cooling control; And the hot oil is in an automatic circulation state.
The carbon fiber molded oil heater is also equipped with a brazed cooling heat exchanger to improve the cooling effect and rate of the system. The equipment can read and display the temperature point of the mold, and the customer's mold can be detected at multiple points, which is convenient for customers to analyze the product and provide reference guarantee for improving the quality of customers' products.
The precise temperature control system adopts dual PID control of heating and cooling to ensure the stability of the temperature of the hot oil at the outlet. The temperature accuracy of the heat transfer oil of the system can be controlled at 1. The operator only needs to set the parameters, and the rest will be completed by our equipment.
When choosing a carbon fiber molded oil heater, the first thing to consider is to determine your own selection plan. Then there is the first comparison, after determining the model, the configuration, advantages, after-sales service and other aspects are compared, and the cost performance of the comprehensive carbon fiber molded oil heater should be compared.