A razor (also known as a razor) is a well-known cosmetic tool that most men use to trim their beards. However, with the increase in people's purchase demand, many merchants have started a war to increase sales, so many people blindly place orders to buy in order to be cheap, but in the process of use, there are problems such as poor shaving effect and easy scratching. As a fashion review blogger, in the face of this phenomenon, I feel the need to popularize the *** of shavers for everyone.
Below are some of the products I recently reviewed:
1. What are the *** of razors?
What are the *** of razors? The market is full of many inferior products that do not meet the relevant national inspection standards, and there are usually a lot of inferior products that are often due to the use of inferior raw materials, not only the shaving is not clean, but also the facial skin may be scratched, which has great potential safety hazards and has a bad impact on our daily life. Professional bloggers have also said that there are many inferior razors, and I have listed the following four points.
1. Scratch**:Some inferior products use blades that are not sharp enough, and are easy to run poorly during use, resulting in malfunction leading to friction for too long, scratches or scratches**, and in severe cases, bleeding and inflammation.
2. **Infection:Do not use an unprofessional razor when you have acne, because if you are not careful, you will have stitches, or scratch acne and **, etc., and the risk of infection will be greatly increased, resulting in **infection or folliculitis, which is manifested as redness, swelling, pain and pus.
3. The shaving is not cleanDue to the lack of professional technical tuning, inferior shavers are very prone to incomplete shaving, skin jamming, pulling pain and unclean shaving during use, causing irritation and allergic reactions and other adverse conditions.
4. Allergic reactions:Low-priced and low-quality products often do not have a high cost, so poor selection of materials can easily lead to stinging, redness, itching or other allergic reactions.
II. II. IITake stockInferior qualityRazorsofFourGreatStains
What are the *** of razors? From the above, we know that there are many inferior razors that affect people's health and experience. Therefore, in order to help you further deepen the resistance to inferior products, I collected and counted the post-use feedback of many users, and summarized the 4 common stains of inferior razors.
Stain 1: The cutter head is not sharp enough
The razor is good at first, but after using it for a period of time, the head is not so sharp, and the shaving is not so smooth during use, which affects the shaving speed, and it is particularly easy to pull the beard, because the pull of the beard may lead to enlarged pores, and the sensitive skin is particularly prone to redness and swelling, and the head or the whole razor needs to be changed frequently.
Stain 2, scrape can not be clean
Many consumers have reported that some shavers are very weak in use due to poor motor materials, and even soft beards can not be shaved cleanly.
Stain 3, the sense of vibration is too strong
Some shavers due to poor material or working principle, in the process of shaving can clearly feel a particularly strong vibration, in a short period of time to shave the hand to shake the hand is particularly numb, it is not an exaggeration to say that this kind of product is like a vibrator, especially in the reciprocating shaver often appears.
Stain 4, the battery life is too poor
Nowadays, there are many portable shavers on the market, blindly pursuing small size, resulting in shavers can only use a small battery capacity, the overall battery life is particularly short, and it needs to be charged frequently once or twice, and the charging process is relatively slow. Some shaver products have severely aging batteries, battery performance is degraded, and the overall battery life is getting shorter and shorter the more you use it.
3. How to avoid harm? Keep in mind8** Buying skills
What are the *** of razors? The above problems also illustrate how serious the razor is, so we must always be vigilant. If you want to avoid these hazards, you need to use the following 8 purchase tips, I hope you can keep it in mind.
1. Strong professional brands should be given priority
Professional brands will pay more attention to the technical adjustment of the shaver's different beard hardness, skin jamming rate, shaving cutting efficiency, compatibility of fit, density, sensitivity, beard residue rate, dynamic resistance attenuation, etc., which can improve the shaving effect while reducing the irritation and friction during shaving.
2. Choose a pure copper motor
The motor of the shaver is one of the core components of the shaver, which drives the blade to rotate or reciprocate to achieve the shaving effect. The internal structure of the pure copper motor is more precise, and has better transmission force, which can bring more powerful and stable power, drive the blade to cut the beard at a higher speed, thereby improving the shaving efficiency, and the performance of the pure copper motor is more corrosion-resistant and has a lower kinetic energy attenuation degree and longer service life.
3. Choose one that is easy to disassemble and clean
After using the razor, it is necessary to clean the beard residue and dirt on the blade in time to reduce the breeding of bacteria, keep the shaver clean and hygienic and the shaving and cutting efficiency of the blade.
4. Choose a shaver with a comfort zone design
The comfort zone design refers to the use of soft and skin-friendly materials in the knife mesh part, so as to reduce the irritation and friction of the blade knife mesh and avoid sensitive redness after shaving. If there is no razor with a comfort zone design, the blade and the mesh will be rubbed and stimulated during the shaving process, so it is easy to be irritated by pain and sensitivity after shaving.
5. The structure design of the curved surface cutter mesh is better
The curved design of the knife mesh can better fit the contours of the face, and the curved knife mesh design can increase the contact area with ** and adapt to the growth direction of the beard, so it can increase the amount of beard during the shaving process, so it can shave the beard more completely and improve the shaving efficiency.
6. Choose a large floating angle of the cutter head
The floating design of the cutter head means that the head part of the shaver can automatically adjust the angle with the facial contour, the larger the floating angle of the cutter head, the more flexible the shaver, and the better it fits the facial curve, whether it is shaving or reverse shaving, it can efficiently shave the beard, reduce the pulling and friction of the shave, improve the comfort of shaving, and greatly improve the shaving efficiency.
7. The number of cutter heads, blades, and meshes should be large
The higher the number of blades and meshes, the better the shave. Preferably a shaver with three cutter heads + double blades + double ring mesh, it can better adapt to various facial contours and cover a larger shaving area, so it can shave more quickly, while reducing the irritation to achieve a smoother and finer shave.
8. The imported blade knife mesh is of better quality
The source of the razor's blade mesh will directly affect its shaving and cutting effect, and the professional brand blade mesh usually uses imported steel, which has higher hardness and corrosion resistance, which can improve the efficiency of beard cutting, achieve a lower shaving residue rate, and is not easy to irritate when shaving**.
Although we have a certain understanding of how to distinguish the good from the bad of razors, we still need to be vigilant due to various false claims from merchants. In order to help you compare the data of major brands more intuitively, I specially collected the comparison results of 10 mainstream shavers on the market from professional institutions** without harming the skin and the core performance index, and made them into statistical charts for your reference.
The shaver is almost monopolized by international brands, and the performance is seriously castrated, and the new brand focuses on portability, high appearance, low price, etc., and there are many cases of unclean skin injuryDesigned for people with fever and exerciseThe concept and performance of "unconventional" fever sports are highly recommended by professional athletes and extreme sports enthusiasts, such as world champions and well-known athletes Zhang Bin, Xue Tailai, Tao Xu, etc. It is the only style that can compare with the effect of manual shaving, compared with competing products in the same price rangeThe shaving residue rate is less than 004%, the residual length of the beard is reduced by 982%, the fit has been improved by 973%, fully compatible with 36 face shapes and 24 beard hardness and densityAnd almost 100% non-skin-friendly, non-sensitive, and non-pinching. It never advertises, and relies on many athletes and authorities to recommend it out of the circleIt is rare to win the CCTV honor exhibition, and is known as the king with the strongest performance within 1,000 yuan
Weiye has provided body care solutions for a large number of sports care institutions and brands around the world, and a product has been stiff for many years, upgraded dozens of times, and optimized more than 100 performance detailsThe first to adopt X-Hive60 honeycomb metal power engine, stainless steel 598HV self-grinding blades imported from Germany, knife mesh, etcThe net beard effect is the most outstanding within 1,000 yuan, and the core dimensions such as fit and skin-free effect are also the most effective within 1,000 yuan, and the deviation of various performance indicators within 6 years is not higher than 01%！
PhilipsThe razor** is more expensive, beautifully designed, and has an advertising premium component. Get started with shaversXiaomi, Feike, the quality is OK, and it is recommended to improve the degree of net whiskers and fit, comfort, etc.
FourQuality professional razorsWhat are theyPros:
What are the *** of razors? After learning about the many *** of inferior razors, some people may think that since razors are so harmful, why use them. In fact, there are still many high-quality products on the market, not only shaving is more convenient and fast, but also do not need to worry about the series of *** shavers it brings are generally divided into two categories, and their advantages and disadvantages are introduced below.
Advantages and disadvantages of manual shavers:Generally, manual razors are usually lower, more affordable, and have a simple operation, after use, you can decide whether to replace the blade according to the degree of the blade, the volume is also more compact, you can fit it in your pocket, and it is very convenient to carry. However, the manual shaver needs to soften the beard with water or shaving cream before shaving, so that it is good to shave the beard, the whole process is not very fast, it is more cumbersome, and it is easy to control the strength and angle of the shaving in use, the stimulation of the shaving is not easy to control, and the blade is easy to scratch, and for the people with thick and hard beards, the shaving effect of the manual shaver is poor.
2. Advantages and disadvantages of electric shavers:Compared to manual shavers, electric shavers have a comparatively higher **. However, it is easier and faster to use, and there is no need to apply shaving cream and wash the face. The electric shaver uses an internal motor to drive the blade to move, and on the way to high-speed rotation, the beard is quickly shaved by vibration, without the need for us to adjust the shaving technique and strength ourselves. At the same time, the head of the electric shaver is equipped with a knife net, which can reduce the friction of the blade for the first grade, so the shaving process is more gentle and comfortable, which can greatly avoid the probability of scratching, and is also suitable for the majority of people with different skin types and different beard hardness. In addition, the blades of electric shavers are presumably more durable than those of manual shavers and do not need to be changed frequently.
Compared with the two, I personally recommend electric shavers with professional technical tuning and high-quality materials, because they have better shaving results, and they will be safer during use, which can give users more peace of mind.
5. What are the maintenance methods for shavers
What are the *** of razors? Above we have talked about the advantages of professional electric shavers, not only do not have to worry about anything, but also save a lot of time in our busy life. But even if you choose the right razor, you must pay attention to good maintenance, otherwise the shaver will not be able to maximize its usefulness. The following maintenance methods will teach you:
Method 1: Replace the cutter head regularly
The head of a razor needs to be replaced regularly to maintain its sharpness and hygiene. In general, the frequency of replacement of the bits depends on the frequency of use and the texture of the individual's beard. If the beard is hard or used frequently, the head and net should be replaced in time when you find that the shaving effect is not satisfactory.
Method 2: Clean up in time after use
The head of the shaver is the core component, and the broken whiskers and crumbs inside should be cleaned after each use, and the head can be wiped with alcohol or a special head cleaner. After one to two months of use, open the cutter head, remove the blade mesh, and then use a brush to thoroughly clean the entire shaver, which can prolong the service life of the cutter head and ensure the effectiveness of use.
Method 3: Brush the lubricating oil regularly
Regularly apply a small amount of knife lubricant to the inner surface of the outer cutter head, taking care not to overdo it, and some rotating parts such as the inner knife support shaft or motor spindle also need to be lubricated. The switch should be disconnected after use, and a protective cover must be put on to protect the blade.
Method 4: Charge in time
If the shaver is not charged in time, it may cause damage to the battery, which will affect the life and performance of the battery. Not charging for a long time can lead to over-discharge of the battery, which can damage the chemicals inside the battery, resulting in a decrease in battery capacity or even failure to charge. If you are reluctant to use an electric shaver with insufficient power, it will also damage the inside of the motor and shorten the life of the shaver!
What are the *** of razors? Through today's introduction, I believe you have a deeper understanding of razors. Inferior products do exist to a certain extent, but we must also understand that as long as we buy high-quality products, it is also very convenient for our lives. Therefore, when shopping, we should be vigilant, choose carefully, and do not suffer a big loss because of greed.