SOMS59 complex brass bar is a high-performance metal material with excellent mechanical properties and corrosion resistance. It is made of an alloy of copper and zinc, with a higher copper content of more than 60% of the total weight. The advantage of this alloy is that it has good strength and hardness, as well as good plasticity and toughness.
During the manufacturing process, SOMS59 complex brass bars require multiple heat treatments and processing to ensure their performance and precision. First, the raw material needs to be melted and cast to form a bar with a certain shape and size. Subsequently, these bars need to be heat treated to make the grain structure inside them more homogeneous and fine, thus improving their mechanical properties. Finally, these bars need to be machined and polished to give their surface a smoother and neater finish.
SOMS59 complex brass rods are used in a wide range of applications in many fields. For example, it can be used to manufacture mechanical parts, electrical connectors, pipe fittings, etc. Due to its excellent corrosion resistance, it can also be used to manufacture parts in the fields of marine engineering, chemical equipment, etc. In addition, due to its excellent mechanical properties, it can also be used to manufacture high-end products such as auto parts and aerospace vehicles.
Overall, SOMS59 complex brass bar is a high-performance metal material with a wide range of application prospects. With the continuous development of science and technology, its application field will become more and more extensive. Therefore, the research and development of this material is of great significance to promote industrial development and improve product quality.
Grade: SOMS59 complex brass bar
European standard steel grade CUZN35Ni3MN2ALPB
Corresponds to EN 12163-2016
Copper & Copper Alloys - General Purpose Bars
copper and copper alloys - rod for general purposes
Classified as copper and copper alloys
Tags: Brass
Density 83 g/cm3
SOMS59 chemical element composition content (%)
Composition: fe si, mn, ni, cu, pb, al sn, other, total, more
Minimum - 15 2 58 0.2 0.3 - zn: margin
The maximum value is 05 0.1 2.5 3 60 0.8 1.3 0.5 0.3
Other individual or other aggregate chemical compositions include chemical compositions with values not specified in the table. Analysis should only be carried out if it is assumed to be present or in routine analysis, and there are indications that its composition will exceed the specified value.
SOMS59 mechanical properties
Diameter, distance to the opposite edge, marking, heat treatment or state, tensile strength, yield point, elongation or elongation after break, hardness
d/t σb σs δ hbw
mm mpa mpa %
5 soms59-r490 r490 ≥490 ≥290 ≥15(a11.3)，
18(a)
5 soms59-h120 h120 120~160
Pat the smell of fireworks around you