New Year's goods are not closed
Ryzen 8000G series has been lifted, I believe that many nail households are ready to upgrade the pension machine, after all, the nuclear display is indeed a big improvement compared to the 7 series, and the B650 motherboard that has been reducing the price can continue to be used, but the full blood core display needs to be manually debugged by the user.
According to the available information,8000G series uses the same Radeon 780M upgraded version of the mobile terminal,Game performance can refer to the test I did before,Online games are easy2K+100FPS,Regular 3A run1080P+60FPS is no pressure。
This article shares with you the colorful B650 general nuclear display debugging tutorial,Welcome to like the collection and reward three times,Including practical teaching at the level of copying homework,Due to the limited time and low communication efficiency in the comment area,Please contact separately if you have complex questions。
Let's mark the key points of this tutorial:
There is no risk in the operation mentioned below, even if the debugging is wrong, at most it is a waste of some memory performance, and there will be no hardware damage, the first time to get the 8000G series CPU users please rest assured to eat, just copy it.
Since I haven't gotten the 8 series CPU, this article takes R5-7600X as an example, the operation process is exactly the same, there is no difference, just copy the homework.
The core graphics performance is directly linked to the memory performance, and the voltage range of the 8 series CPU is not clear now, so we can only wait for the follow-up to separate the overclocking tutorial of the colorful AMD platform motherboard.
With the launch of the 8 series CPUs, each company will have a new version of B650 and X670 for sale, and there are actually a lot of pits for writing configuration lists.
The hardware used this time is as follows, so you can refer to it.
Motherboard丨Colorful CVN B650M Gaming Frozen V14 Battleship
Introduction:With the newly released motherboard of the 8 series Ryzen, the biggest highlight is, of course, that it is not expensive (relatively speaking), the configuration of the same level is normal to start with a thousand, and the current ** that has just been put on sale is only 999 yuan, and it may be about 800 yuan in the later period.
This motherboard has two PCIe 5 on board0 protocol m2 interfaces as well as a full blood PCIe50 pcie16 slots, the real sense of the battle future, of course, these and only pcie4It doesn't matter if the 8000G series APU has 0 channels.
The more APU-friendly is the memory support, this motherboard currently supports up to 7600MHz frequency, which is a great improvement from the previous maximum of 6400MHz, and the following will also test the support of XMP high-frequency memory.
CPU丨AMD R5-7600X
Introduction: This case CPU, only for demonstration purposes, of course, if you plan to use a discrete graphics card, 7600X will be a good choice.
Memory丨Acer Ice Blade 7200MHz 24G
Introduction: In this case memory, XMP can be stably tested by TM5, if you are worried about overclocking, you can directly enter this XMP high-frequency memory.
Before we start, let's talk about the configuration principle, which is divided into four parts: CPU, memory, power supply and driver
The first is the CPU, which can improve the overall performance of the CPU by adjusting the PBO policy.
The second is memory, the core graphics card is to call the memory as the video memory, and the frequency can be increased + the allocated capacity can improve the performance of the independent display.
The third is the power supply, the BIOS layer configuration is sufficient, and the Windows layer is not recommended to be modified.
Finally, there is the driver, which can be modified to modify the driver mode and game configuration.
In addition, you are not afraid of trouble, you can also modify the configuration of the game itself on third-party tools such as reshade and mod, which has been shared before, and you can nod your head if you are interested.
Next is the quantitative test, the test tool is 3DMark for the core display module Nightraid, the running score before optimization is shown in the figure below
The composite score is 10703
The graphics score is 10289
The CPU score is 13870
The optimized running score is shown in the following figure:
The comprehensive score is 11123, an increase of about 392%。
The graphics card score is 10814, an increase of about 510%。
The CPU score is 13279, a drop of about 445%。
Since the 7600X has only 2 CUs, the increase will not be very large, and the 780M has 16 CUs, and the theoretical increase rate will be much higher than that of this group of case equipment.
In particular, according to the previous experience, the BIOS of each motherboard must be updated more diligently, and it is recommended to follow the update, especially for the new motherboard, the performance ceiling, energy consumption ratio and stability will inevitably be improved.
Now the colorful motherboard update BIOS is relatively simple, prepare a U disk ** good firmware, enter the BIOS and click the mouse to complete the update, basically have a hand on the line, see the official website for details.
Considering that most of the novices who read this article, here is a little more detailed, just copy the homework.
Modify memory preset + power mode
Press the DEL button to enter the BIOS on the boot and modify the following two items on the home page:
The first step is to modify the memory preset to the manufacturer's overclocking mode, which usually has two sets of XMP EXPO, choose one at random.
The second step is to switch the EZ OC mode to the performance mode.
Modify the PBO mode
Click Advanced in Advanced Mode to enter AMD Overclocking, and then a protocol will pop up, and click Accept to enter the PBO configuration page.
After entering the PBO configuration page, modify the following figure:
The first step is to change the pbo scalar ctrl to manual.
The second step is to change the PBO scalar value to the highest, which is usually 10x.
The above pbolimits is not recommended to move, I just did a test, and whether the 7600x is changed or not has little impact on the nuclear display.
Modify the memory capacity
Or on the Advanced Mode page, click on the motherboard chipset and modify it according to the figure below
The first step is to change the integrated graphics controller mode to forces.
Step 2: Click on the uma fram buffer size and pull it to 2G.
It should be noted here that the 8 series APU may be able to give up to 8G or even higher video memory, generally 2-4G is enough, too big is useless.
At this point, all the BIOS configurations that need to be modified are completed, save and restart the computer.
It is divided into two parts: AMD Radeon driver and in-game configuration.
Modify the drive mode
7600X's driver configuration is relatively simple,There is only one option for mode,Change to quality mode,8 series APU has more AFMF frame insertion function,I will share the specific configuration method with you when you get it。
In-game modifications
The biggest improvement of the 780M core display is the support of FSR, although it belongs to the same frame interpolation technology as AFMF, but it supports a lot more games, and it can improve the frame rate of many games after it is turned on, at the cost that the visual perception may be worse.
At this point, all the optimization has been completed,Friends with strong hands-on ability can try reshade,Modify the game image quality or improve the frame rate,Interested in reading the tutorial written before。